1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-6523
  6. Manual de instrucciones

Metra 95-6523 Manual De Instrucciones

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 95-6523
Ram Promaster 2014-up
KIT FEATURES
• Double DIN radio provision
• Custom texture
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Radio mounting brackets • D) (4) White plastic panel clips
• E) (8) 5mm x 12mm Phillips Screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-1784 or XSVI-6523-NAV
Antenna Adapter: • 40-VW10 or 40-EU10
METRA. The World's best kits.
APPLICATIONS
95-6523
C
D
1-800-221-0932
™
Dash Disassembly
– Ram Promaster 2014-up ...................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
E
• 86-5618 radio removal tool
• 86-3528 radio removal tool
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 95-6523

Resumen de contenidos para Metra 95-6523

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-6523 APPLICATIONS Table of Contents Ram Promaster 2014-up 95-6523 Dash Disassembly – Ram Promaster 2014-up ........2 Kit Assembly – Double DIN radio provision ........3 KIT FEATURES • Double DIN radio provision • Custom texture KIT COMPONENTS •...

  • Página 2: Dash Disassembly

    95-6523 Dash Disassembly With radio delete or Single DIN factory radio: 1. Using Metra’s 86-5618 radio removal tools pull the factory radio from the dash. 2. Remove (2) Phillips screws in bottom of dash opening. 3. Unclip and remove the factory radio trim panel.

  • Página 3: Kit Assembly

    (Figure D) and secure with the (2) Phillips 5. Locate the factory wiring harness screws removed in disassembly. in the dash. Metra recommends (Figure C) (Figure D) Remove pin using the proper mating adapter from Metra or AXXESS.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-6523 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6523 AplicAciones Indice Ram Promaster 2014 y mas 95-6523 Desmontaje del tablero – Ram Promaster 2014 y mas ......... 2 Ensamble del kit – Provisión de radio doble DIN ........3 cArActerísticAs del kit •...

  • Página 6: Desmontaje Del Tablero

    95-6523 Desmontaje del tablero Sin radio o con radio de fábrica de DIN sencillo: 1. Usando las herramientas de remoción del radio 86-5618 saque el radio de fábrica del tablero. (Figura A) 2. Quite los (2) tornillos Phillips de abajo de la apertura del tablero.

  • Página 7: Ensamble Del Kit

    5. Ubique el arnés de cableado de fábrica y sujete con los (2) tornillos Phillips en el tablero. Metra recomienda el retirados al desensamblar. (Figura C) uso de un adaptador adecuado de (Figura D) Retirar el pasador acoplamiento de Metra o de AXXESS.
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6523 EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido