Sefa CLAM SPORT V3 Guia Del Usuario página 14

2021-03-25
g� List of alarms / events
Alarm 01: Probe PT100
Alarm 02: Overheating Tem-
perature above 220°C
Alarm 06: Platen lift
Alarm 10: Communication
error
Alarm 13: Temperature not
reached.
14
Press the red/orange area to clear the fault.
Probe signal lost (sensor or cable). The
heating control is instantly disabled.
Temperature reading above 230°C. The
heating control is instantly disabled.
The top travel limit is not read during the
lift phase before the platen lift time-out
ends.
Communication lost
board and screen board.
Contact your stockist.
Blocks first cycle start request. Permits
cycle start at second request (forced start
despite setpoint not being reached).
between power
www.sefa.fr