Disassembly Of The Drive Shaft - Powerfix Profi PBMP 30 A1 Instrucciones De Uso

Disassembly of the drive shaft

Disassembly of the short drive shaft e
Wheel rim chuck
µ
Open the chuck with the chuck key through the recess
q
the pump
µ
Unscrew the short drive shaft
the open-ended spanner from the pump
Quick-release chuck
µ
Using the open-ended spanner through the recess
w
drive shaft
µ
Allow the electric drill
volutions. The drive shaft
µ
Remove the pump
µ
Remove the drive shaft
Disassembly of the long drive shaft r
Chuck with SDS fitting
µ
Using the open-ended spanner through the recess,
w
drive shaft
µ
Allow the electric drill
revolutions. With this the drive shaft
µ
Remove the pump
µ
Remove the drive shaft
from the mounting
q
of the pump .
u
to run with an anti-clockwise rotation and low re-
e
is thereby released from the pump
q
from the mounting
e
from the chuck.
q
of the pump .
u
to run with an anti-clockwise rotation and low
q
from the mounting
r
from the chuck.
y
.
e
by using a cross-headed screwdriver and
q
.
y
.
r
will be released from the pump
y
.
- 27 -
i
and then remove
i
, counter screw the
q
.
i
counter screw the
GB/MT
q
.