Before using your new 9 DBI high gain WiFi outdoor antenna,
Before using your new 9 DBI high gain WiFi outdoor antenna,
please read this instruction manual to prevent any damage. Put
please read this instruction manual to prevent any damage. Put
it away in a safe place for future references.
it away in a safe place for future references.
IMPORTANT
Do not expose this device to extreme temperatures
Do not use or store this device anywhere it might get wet. This
could cause malfunctions and the risk of electrical shock.
Always use a clean, dry, and soft rag in order to clean this
device.
MAIN FEATURES
Directional antenna with 9 dBi gain
Supports frequencies between 2.4 – 2.5 GHz
Ideal for access points or wireless bridges
In order to begin your new high-gain antenna, follow these
steps:
1.- Disconnect the access point form the power source
2.- Locate the SMA connector input
3.- If you had an antenna previously installed, remove it.
4.- Connect this antenna through the SMA connector. Make sure
to screw it in completely.
5.- Connect the access point to the power source.
FIELD PATTERN
Amplitude distance: MGS-DS-09-H-2-5.nsi
ENGLISH-2