Epson L300 Manual Del Usuario página 11

Ocultar thumbs Ver también para L300:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Do not continue printing when the ink level is below the lower line on the ink tank. Continued
use of the product when the ink level is below the lower line could damage the product. Epson
recommends filling all ink tanks to the upper line when the product is not operating to reset the
ink levels. If the ink tank is filled as specified above, this product provides an alert and stops
operating at the estimated time so that the ink levels do not fall below the lower line on the
ink tank.
Use ink bottles with the correct part number for this product.
The use of non-genuine ink may cause damage that is not covered by Epson's warranty, and
under certain circumstances, may cause erratic product behavior.
Be careful not to touch any ink when you handle the ink tanks, ink tank caps, and opened ink
bottles or ink bottle caps. If ink gets on your skin, wash the area thoroughly with soap and
water. If ink gets into your eyes, flush them with water. If ink gets into your mouth, spit it out.
This product requires careful handling of ink. Ink may splatter when the ink tanks are filled or
refilled with ink. If ink gets on your clothes or belongings, it may not come off.
Do not open the ink bottle package until you are ready to fill an ink tank. Ink bottles are
vacuum packed to maintain reliability. If you leave an ink bottle unpacked for a long time
before using it, print quality may be affected.
If the ink level is below the lower line on the ink tank, refill the ink soon. Continued use of the
product when the ink level is below the lower line on the ink tank could damage the product.
After bringing an ink bottle inside from a cold storage site, allow it to warm up at room
temperature for at least three hours before using it.
Store ink bottles in a cool, dark place.
Store the ink bottles in the same environment as the product. When storing or transporting an
ink bottle after removing its seal, do not tilt the bottle and do not subject it to impacts or
temperature changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened
securely. Be sure to keep the ink bottle upright when tightening the cap, and take measures to
prevent ink from leaking when you transport the bottle.
To maintain optimum print head performance, some ink is consumed from all ink tanks
during printing and when performing maintenance operations, such as cleaning the print head.
The ink bottles may contain recycled materials, but this does not affect product function or
performance.
When printing in monochrome or grayscale, color ink may be used, instead of black ink,
depending on the paper type or print quality settings. This is because a mixture of color inks is
used to create black.
Important Safety Instructions
11

Publicidad

Tabla de contenido
loading

Tabla de contenido