Installation - Defiant MSH27920LWD Guía Del Usuario Y De Mantenimiento

installation

1
Mounting the coverplate
□
Line up the holes on the mounting bracket
(AA) with the holes on your junction box. Using
either (2) #6 screws (CC) or (2) #8 screws
(DD) (depending on size of the holes in your
junction box), attach the mounting bracket
(AA) to your junction box.
WaRning: Risk of electric shock. Disconnect power at
fuse or circuit breaker before installing or servicing.
AA
CC
or
DD
3
Mounting the fixture
□
Attach fixture (A) to the mounting bracket (AA)
using (2) #8 x 1-1/4 in. screws (FF) provided.
Be sure no loose wires remain sticking out
from underneath the coverplate. Insert the
decorative screw cover caps (GG) into the
screw holes on the coverplate for a finished
appearance.
□
Apply silicone caulk around the edges of the
coverplate and the adjustment arm lock nuts
to provide a watertight seal from rain and
moisture.
□
Turn on power at the main fuse/ breaker box.
2
Junction
box
EE
7
Wiring the fixture
□
Hang one end of the support hook onto the
mounting bracket and hang the light fixture on
the other end of the support hook.
□
Thread fixture wires through coverplate
gasket (BB).
□
Connect fixture black wire to house black
wire, fixture white wire to house white wire,
and fixture ground wire to house ground wire
using the attached quick connectors.
AA
BB
Please contact 1-866-308-3976 for further assistance.
Junction
box
A
A
FF
GG
HOMEDEPOT.com