2. ASSEMBlE ROOF FRAME
NOTE: Start with the center beam,
then assemble the sides
3. AttACH FEEt tO lEGS
A. Insert the leg poles (10043) into the foot plates (10050). Align holes.
B. Insert one long pin (10052) through all eight legs to secure base foot. Repeat with each leg.
4. AttACH lEGS tO ROOF FRAME
Attach all legs to one side first. Let the other side of roof frame rest on the ground.
Repeat for opposite side.
A
Page 5
Swedged Tube Connections
B
Crimp Marks
05-23571-0B