Casselin CPAI350A Manual De Instrucciones página 16

If the induction stove recognizes too large a difference in magnetic field, a drop in power occurs. This may
EN
cause the safety lock to operate, thus preventing the device from overheating. Therefore, avoid using
aluminum, bronze or non-metallic containers.
1. Timer (0 - 180 minutes)
2. Digital display
3. LED indicator for power, temperature ° C and timer degrees
4. Selection key for temperature ° C or power mode
5. ON indicator light
6. ON / OFF button
7. Selection key: used to increase the time, temperature or power value.
8. Selection key: used to decrease the time, temperature or power value.
SETTING
Degrees of power
The display shows the power level 5 set by default.
Using the selection keys 8 and 7 you can change this setting at any time in the ranges.
4 The selected power level is displayed on the screen.
Temperature degree
If, instead of power degrees, you want to use temperature degrees, press the mode selection key to select
temperature mode.
The device is turned on at the default temperature of 120 ° C.
Using the selection keys 8 and 7 you can change this setting at any time in the temperatures in a range
between 60 ° C and 240 ° C. (Temperature settings in increments of 20 ° C from 60 ° C up to 240 ° C)
The selected temperature appears on the digital display and the temperature indicator light (4).
Timer
After choosing the operating mode (power mode or temperature mode), press key 1. The number "0" appears
on the screen, and next to the digital screen the timer LED lights up ( 1 MIN).
Using buttons 8 and 7 it is possible to select the appropriate duration in one minute intervals up to 30 minutes,
and in 10 minute intervals up to a maximum of 180 minutes.
The time is counted in one minute intervals, while the digital display returns to the display (4).
After the selected time has elapsed, the appliance switches off automatically. Only the fan will continue to
operate for about 1 minute in order to cool the electronic parts, then it will turn off.
NOTE
The device is fitted with a safety system in the event of overheating. If tripped, unplug the device and allow it
to cool. If this protection system operates regularly, it is imperative to contact our after-sales service or your
dealer.