Presentation; Information; Description Of Symbols; Declaration Of Conformity - Casselin CFRP1 Manual De Instrucciones

1. PRESENTATION

1.1 Information

This manual is for information to all its users. It describes the installation and operation of the unit. The safety
instructions and device technical knowledge are detailed in this manual. They are prerequisites for a good
use of professional equipment.
Each user must carefully follow all instructions. This manual must be kept next to the product for proper use
and accession to permanently instructions for each user.

1.2 Description of symbols

The information, usage tips and safety instructions are represented by symbols. It is essential to follow these
instructions to avoid property damage and bodily.
WARNING
This symbol means that there is a danger that can lead to injury. Concentration and caution are imperative
to operate the equipment.
ELECTRICAL HAZARD
This means there is a danger related to electric current. Ignoring the instructions can cause personal injury
and death.
WARNING
This symbol is used to indicate that the non-compliance of the instructions can result in failure or destruction
of the unit.
NOTE
This symbol indicates good practice and advice that should be applied for efficient use of the unit.
NOTE
Reading this manual is imperative before the commissioning of the unit. We accept no liability for damage
and outages resulting from non-compliance with the instructions. The Casselin company reserves the right
to make changes whether technical character, informative and marketing of our products without notice.
1.3 Rights of'author
The user manual is protected by copyright law. Reproductions of all kinds and shapes - even partial - and the
operation and / or transmission of its contents are not permitted without our permission. Any violation of these
provisions entitle to damages. Other rights are reserved.
1.4 Statement of compliance
The device corresponds to current standards and directives of the European Union. We certify this in the EC

declaration of conformity.

1.5 Warranty
The instructions given on this manual were developed taking into account the regulations, the current
technical development of our knowledge and experience. All translations were established professionally.
EN