MSA APTURA LT12 Instrucciones Para El Usuario página 2

P/N 10044813
STEP 1:
Remove housing plug and housing access door.
STEP 4:
IAdjust drum position with 1/4 inch square drive wrench
if interior hole does not align with small hole in housing.
Ensure the webbing slot is parallel to nozzle opening.
Insert line replacement housing access door into small
hole in housing.
Secure housing access door with screw.
Page 2
User Instructions
STEP 2:
Pinch nozzle to remove and extract entire line length.
STEP 5:
Remove web anchor bolt using 1/4 inch hex wrench. Use
1/4 inch square drive wrench to hold drum in place.
APTURA LT12 Self-Retracting Lanyard for Field Line Replacement
STEP 3:
IMaintain tension on the line while inserting 1/4 inch square
drive wrench through housing plug hole beneath labels.
Turn counterclockwise until you can see the webbing
slot is parallel with nozzle opening.
STEP 6:
Remove line.
© 2003, MSA