Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
force or "kink" the cable. Do not use in areas where visual inspection camera and
cable will contact corrosive or oily substances. Do not use the cable to clear clogs or
move obstructions. This is not a drain cleaner!
WARNING
CLEANING
1.
Use a soft, dry, clean-cloth clean the adapter and LCD panel.
2.
Clean torque wrench by wiping. Do not immerse.
3.
Store torque wrench in protective case at its lowest torque setting. Do not force
handle below lowest setting.
4.
If the adapter gets wet, wipe it with a dry towel as soon as possible. The salt in
seawater can be especially damaging.
5.
Do not use organic solvents, such as alcohol or point thinner when cleaning the
adapter.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
Before disposing of damaged, check with your state Environmental Protection Agency
to find out about special restrictions on the disposal of tool or return them to a certified
service center for recycling.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors
Trademarks used under license to Mobiletron Electronics Co., Ltd.
1English1
To reduce the risk of damage to the tool, do not use excessive
MAINTENANCE
Remove batteries before cleaning.
ACCESSORIES
PROTECTING THE ENVIRONMENT
English
-10
Publicidad
Tabla de contenido
