Using The Foot Valve - GENERGY DEVA 1 Instrucciones De Uso

Types of GENERGY CAMLOCK connectors available
TYPE A TYPE B
MALE CAMLOCK FEMALE CAMLOCK
FEMALE THREAD MALE THREAD
References of available CAMLOCK connectors by diameter and type
Diameter TYPE A
1"
2015200
1-1/4"
2015201
1.1/2"
2015202
2"
2015203
3"
2015204
4"
2015205
In bold 1-1/4" (correct inlet/outlet size for this water pump). if you use 1-1/4" camlock
have in mind the hose necessary will be 1-1/4" (34mm in diameter).
However if you use the standard equipment supplied together water pump, the outlet
will be 1" and hose necessary 1" (25mm in diameter).
4.5 Using foot valve (not included).
The time required to complete the aspiration and the pump starts expelling water
depends on the depth at which it aspires. If it aspires water at the pump level, the
pump will pump water immediately. But if we are at 4 or 5m aspiration time will be
much longer reaching 2 minutes or more depending on the model. Remember that
the pump body must be filled with water at all times!
When aspirated into deep (a meter or more) we recommend the use of a foot valve.
This remains installed at the tip of the aspiration hose replacing the aspiration filter.
The foot valve only allows circulating water in an upward direction, not allowing the
water back.
TYPE C TYPE D
FEMALE CAMLOCK FEMALE CAMLOCK
HOSE FEMALE THREAD
TYPE B TYPE C
2015210 2015220
2015211 2015221
2015212 2015222
2015213 2015223
2015214 2015224
2015215 2015225
8
TYPE E
MALE CAMLOCK
HOSE
TYPE D TYPE E
2015230 2015240
2015231 2015241
2015232 2015242
2015233 2015243
2015234 2015244
2015235 2015245
TYPE F
MALE CAMLOCK
MALE THREAD
TYPE F
2015250
2015251
2015252
2015253
2015254
2015255