Special Safety Precautions For This Device; Intended Use; Description Of The Controls / Supplied Parts; Turn On/Off - Clatronic KM 3421 Instrucciones De Servicio

Special Safety Precautions for this Device

WARNING: Risk of injury!
• Do not connect the device to mains power supply before
attaching all necessary accessories.
• Do not touch moving parts and wait until the appliances
come to a standstill.
• Whilst in use, there must be no objects, e.g. spoons or
dough scrapers, in the bowl.
• Do not tamper with the safety switches.
• Only use the mincer when the protective cover for the
drive shaft is fitted (Page 3, Fig. B)!
• When cleaning and assembling the mincer, handle the
knife (16) with the necessary care!
• Use only the pusher to fill the mincer (11).
CAUTION: Risk of overload!
Use the appliance either as a mixer or as a mincer, but never
both functions at the same time.
• Place the device on a flat, level and sturdy surface.
• Only process foodstuffs with this device.
• Do not operate the appliance for more than 10 minutes. Let
it cool down for approx. 10 minutes before using it again.
• Do not move the appliance during operation; always turn
it off first and disconnect from mains power supply. Always
carry the appliance with both hands!

Intended Use

This appliance is designed for
• The preparation of dough, cream, whipped cream, egg
whites;
• Grinding (mincing) food.
• Shaping dough using the various attachments.
It is designed exclusively for this purpose and may only be
used therefor.
It may only be used in the manner described in this instruction
manual.
The appliance may not be used for commercial purposes.
Any other use is considered not as intended and may lead to
damage to property or even personal injury.
The manufacturer assumes no liability for damage resulting
from use other than the intended purpose.
Description of the controls /
Supplied parts
Figure A:
1 Worm drive cover
2 Swivel arm
3 Control panel
4 Knob for raising the arm
5 Motor housing
6 Mixing bowl
7a Kneading hook
7b Mixing hook
7c Egg beater
8 Protective disc
9 Drive shaft
10 Splash guard on mixing bowl
Figure B:
Protective cover for the drive shaft
Figures C – F on the last page:
11 Pusher
12 Filler tray
13 Worm housing filler neck
14 Worm
15 Silicone coupling
16 Knife
17 Plate (3 different hole sizes)
18 Ring nut
19 Dough divider
20 Sausage attachment
21 Attachment for oriental dough pouches (2 parts)
22 Cookie maker
23 Cookie cutter

Turn on/off

• Turn on: Select a speed setting between 1 and 4 on the
control panel.
• Turn off: Press the OFF button.
NOTE:
The motor has a safety switch. It switches the motor off as
soon as the arm (2) swivels up.

Before initial use

• Remove the appliance and all included accessories from
the box.
• Check that all supplied parts are in the box.
• In order to remove any production residue, clean all acces-
sories before initial use as described under "Cleaning".

Electrical Connection

Ensure that your mains power corresponds with the specifica-
tions on the type label.

The kneading machine

Assembly and operation

1. Turn the knob (4) in the direction of the arrow. The arm (2)
swivels up.
2. To use the beater (7c), first attach the splash guard (10):
Hold the splash guard with the collar facing up.
NOTE:
On the bottom end of the arm you will see two recesses
on the right and left ( ●).
37