Weston PRO-1000 Manual De Instrucciones página 13

THERMAL OVERLOAD PROTECTOR
!
WARNING!!
Before cleaning or servicing the Dehydrator, make sure it is unplugged
from the power source. It is important to read & fully understand all of the instructions
& safeguard prior to use of the Dehydrator.
The Dehydrator will automatically shut down
if it overheats. If this occurs:
1. Turn the Dehydrator "OFF" and unplug
the Power Cord. Allow the Dehydrator to be
completely cool.
2. Remove all Trays from the Dehydrator.
3. In the back of the Dehydrator, there is a
Grid Panel protecting the Fan (it resembles
the trays) (FIGURE 4). Remove the Wing
Nut (FIGURE 4A) and the Grid Panel to
access the electric components.
4. Using a small flat-head screw driver,
fit it into the slot in the Electronics Cover
(FIGURE 5). NOTE: Do not remove the
Electronics Cover.
5. Once you feel for the Reset Button (Figure
5a), push the screwdriver left to push the
Reset Button in to reset it.
6. Remove the screwdriver from the unit.
Plug in the unit to see if the power of the
Dehydrator has been restored.
7. Once you have resotred the power to the
Dehydrator, turn the Dehydrator "OFF" and
unplug the Power Cord.
8. Replace the Grid Panel.
9. Secure the Grid Panel into place with the
Wing Nut.
10. Plug in the Power Cord and resume
normal operation.
FUSE
This unit is includes a fuse on the back side
of the unit to protect electric components from
damage and overheating. In the event that the
dehydrator stops functioning or will not maintain
its temperature consistently, you make need to check the fuse.
1. Turn the Power Switch off "O". disconnect the Power Cord from the electrical
outlet.
2. Allow the Dehydrator to completely cool before attempting to move the
dehydrator to access the back of the unit.
3. Unscrew the fuse and inspect the fuse to check for signs of burning or damage.
4. If you suspect the fuse is damaged, please call Customer Service for a
replacement fuse.
Wing Nut
Grid Panel
Electronics
Cover
DO NOT
REMOVE
FIGURE 5A
INTERNAL VIEW
Electronics Cover
DO NOT REMOVE
COVER
FIGURE 4A
FIGURE 4
Inside
View
of the
Dehydrator
FIGURE 5
Reset Button
13