Switching On; Switching O - Philips 4504 Serie Manual Del Usuario

Chapter 2
Using Homepage
Note: This manual is for common use. Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. And for some models, certain options are not available.
You can select all the features from homepage.
1. Press to display homepage.
2. Press ▲/▼/◄/►to select icons from the screen list.
3. Press OK to enter each option.
4. To exit the menu, press EXIT.
WARNING:
• Configure the network settings before using Smart TV.
• Slow responses and/or interruptions may occur, depending on your network conditions.
• If you experience a problem using an application, please contact the content provider.
• According to circumstances of the contents provider, an application's updates or the application itself may be
discontinued.
• Depending on your country's regulations, some applications may have limited service or not be supported.
Homepage-
Source
Homepage-Source
Source: Select the input source from devices connected to TV through different ports.
Homepage-Smart
Smart: Displays the smart menu.
Homepage-Apps
Many useful and entertaining apps for using. After entering the Apps Store, you will see the recommendations.
Press ▲/▼/◄/► to select, press OK to enter.

Switching on

Follow the instructions on this page on how to switch on your TV set and the remote
control before going on to following pages describing how to use the channel set-up
procedure.
1 .To x the double support base on the unit by screws,the installation is completed.
*To bring you better visual experience, please remove all labels, if any, from
TV front panel and screen before use.
*Figures and illustrations in this User Manual are provided for reference only
and may di er from actual product appearance.Product design and speci cations
may be changed without notice.
2. Insert two AAA batteries in the remote control.
Precautions on using batteries:
- Only use the battery types speci ed.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine, re or the like,
throw them in a re, recharge them or try to open them, as this could cause
them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long
period of time.
3. Connect the power cable FIRST to the television, THEN to a mains socket.
(Note: If the power cable is connected to the television, please only connect the
power cable to the mains socket.)
TV TV TV AV AV
Your TV set should only be connected to an AC supply. It must not be connected
to a DC supply. If the plug is detached from the cable, do not, under any
APP Store APP Store
circumstances, connect it to a mains socket, as there is a risk of electric shock.
Source Source Smart Smart Source Smart
Note: The gures are for representation only. The location of the power socket at
Homepage-Smart
the back of the television might di er depending on the model.
4. Connect an outside aerial to the ANT/CABLE IN or SAT IN socket at the back of
the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting
an external aerial or other equipment tted.
5. When powered on, the TV will be turned on directly or be in standby.
Note: For some models, switch the TV on by pressing the power button.
If the power indicator lights up, the TV set is in standby mode. Press the
button on the remote control or on the TV set to turn on the TV.

Switching o

To put the TV set into standby mode, press the
or on the TV, the TV set remains powered up, but with low energy consumption.
To switch o the TV set, unplug the mains socket from the mains outlet.
Note: For some models, press the power button to switch o the TV set .
General Operation
AV HDMI1 HDMI1 TV HDMI1 HDMI2 HDMI2 AV HDMI2 Media Media
APP Store APP Store
Source Smart
Homepage-Apps
9
HDMI1 Media HDMI2 Media
button on the remote control