INSTALLATION INSTRUCTIONS
• STEP #3
o Refer to Figure #1, Mounting Clips Detail [Installation for solid surface countertops with a minimum
thickness of 1" (25mm). Installer must supply anchors for thinner countertops.]
o For solid surface, drill anchors hole 3/8" Dia. x 1/2" deep. Apply small amount of Epoxy (not
provided) to closed end of Threaded Knurl (C). Insert threaded knurl (threaded open end exposed).
o Apply Plumber's Putty or Caulking around the topside of rim near the edge as shown.
o Carefully raise Lavatory in place, align, and press firmly.
o Wipe off excess sealant.
o Attach Undermount Clips (B) to hold Lavatory in place.
o NOTE: FOR WOOD COUNTERTOPS USE WOOD SCREWS AND ANCHORS,
WOOD SCREWS NOT PROVIDED.
N
o
OTE: ALLOW SEALANT TO SET BEFORE PROCEEDING!
Countertop
Apply plumber's
putty or
caulking here
Customer Service: 561-274-2110
www.decolav.com
MODEL NUMBER: 1495U SERIES
Lavatory
Figure #1
Threaded Knurl
Mounting Clip
Machine Screw
Mounting Clip Detail
LET YOUR DREAMS COME ALIVE, YOUR PASSIONS
BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS
4
Washer
®