List Of Spare Parts - Kettler DAYTONA Instrucciones De Montaje

GB IRL
■ Please ensure that the vehicle will only be used for playing when assembly has been car-
ried out correctly, and checked, by an adult.
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly
instructions carefully before beginning work. Assemble the vehicle in the exact sequence
shown by the letters in the diagrams. This is essential for the safe function and use of the
toy vehicle.
■ Please note that there is always a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
■ Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw connec-
tions have been tightened firmly. Attention: once locknuts have been unscrewed they no
longer function correctly (the locking device is destroyed), and must be replaced.
■ When assembling plastic grips: The grips can be pushed onto the handlebars more easily
if they are first soaked in warm water.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
List of spare parts page 92-95
When ordering spare parts, always state the full article number, spare-partnumber, the
quantity required and the S/N of the product (see handling).
Example order: Art. no. 0T01020-0000 / spare-part no. 70121342 / 1 pieces / S/N
....................
Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which
is safe for transportation, in the original box if possible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.) is required, this should be clearly stated on the order by adding the
words „with fastening material".
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article
correctly and safely (local refuse sites).
GB KETTLER GB Ltd.
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
+44 1527 591901
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 62423
Mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333