Batteries - Agio 1031541 Instrucciones De Ensamblado

Step 5- Stick the conversion label on the rating plate as shown in Figure 8.
Serial Number _________________
CAUTION: The gas pressure regulator provided with this appliance must be used. This regulator is set for an outlet pressure of
This appliance has been converted to use Natural Gas. Input 40,000 Btu/hr.
Max Gas Supply Pressure 7 inch w.c. (1.74 kPa) Min. Gas Supply Pressure 5 inch w.c. (1.24 kPa)
Minimum clearance from combustible constructions: Sides: 24 in.609 mm. Top 72 in. 1828 mm.
FOR OUTDOOR USE ONLY. If stored indoors, detach and leave cylinder outdoors.
Make sure the control knob is in the "OFF" position.
Unscrew the push button cap on the ignition module
located on the control panel to access the battery
compartment. The ignition module requires one
Alkaline AAA size battery (1.5V). The negative (-) end
goes in first. See Figure 9. Dispose of battery safely.
Battery may explode or leak if charged or disposed of
in fire. Make sure of the polarity. The battery included
is mercury and cadmium free.
CAUTIONS: BATTERY INSTRUCTIONS
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old
and new ones, or batteries of different types.
• Clean the battery contacts and also those of the device prior to battery
installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from equipment which is not to be used for an extended
period of time.
•
Remove used batteries promptly.
For recycling and disposal of batteries to protect the environment, please check
the internet or your local phone directory for local recycling centers and / or follow
local government regulations.
Jul-01-2016
Metal Rating Plate
Figure 8

BATTERIES

Model Number: 98910
•
•
•
•
•
•
•
Conversion Label
9
IGNITION
MODULE
Figure 9