Hunter HT1726 El Manual Del Propietario página 7

Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
Open fuse cover. The manufacturer shall indicate the specific way to open
the cover, such as, slide open fuse access cover on top of attachment plug
towards blades, or push on tabs located next to the blades.
Remove fuse carefully. The manufacturer shall indicate the appropriate
way to remove the fuse, such as whether to push the fuse from the other
side or turn fuseholder over to remove fuse.
Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse (provided with
product). The blank shall be filled in with the current rating of the fuse.
Words locatd in parenthesis are applicable only if the replacement fuse is
provided with the product.
Close fuse cover. The manufacturer shall dictate the specific way to close
the cover, such as, slide the fuse access cover on top of attachment plug or
push cover closed so that all tabs latch.