Disconnecting The Device - LDLC CHROME BOX 2.5 Guía De Usuario

CONNECTING TO A PC
1. Turn on your PC / Laptop.
2. Plug the USB 3.0 micro B type connector to the back of the drive.
3. Connect another end of the USB cable to an available USB port on your PC / Laptop.
4. Verify that the drive appears under "My Computer" in Windows Explorer or the drive icon
will display on the desktop.
Note：It may take few seconds for your computer to configure your drive.

DISCONNECTING THE DEVICE

Windows
1. PC users: right click on the "Safely Remove Hardware" icon located in the System Tray,
which is in the lower right corner of your Windows desktop taskbar.
2. In the list that is displayed, select "Eject Hardware"
3. It will give you a message when it is safe to remove the device.
Note: Disconnecting the device before receiving this notification, can lead to loss or data
damages. When the message "Safe to Remove Hardware" appears, you can unplug the drive
from the USB port.
MAC
To safely disconnect the plugged drive from the host machine, close all the windows listing
the content of the removable disk. Once all the windows are closed, click on the USB
Storage icon, which is located on the Desk, and drag the volume icon to the Trash. Wait 5
seconds before unplugging the drive.