Koenic KSI 240 Manual De Instrucciones página 21

Steam ironing and steam boost function
Steam ironing and steam boost can only be
used at temperatures between 3 and MAX.
This temperature range is shown on the
temperature control.
1. Put the water-filled iron onto its standing
base.
2. Connect the power plug to a suitable
power outlet.
3. Set the desired temperature on the
temperature control dial by turning it to the
ironing setting. The operation control LED
and indicator light turns on.
4. The temperature control light is illuminated
as long as the iron is heating up. It switches
off as soon as the set temperature has
been reached.
5. You can set the desired steam amount
on the steam control or you can shut the
steam off entirely for dry ironing.
6. Press the knob to generate a steam
boost.
Dry ironing
The tank can be empty for dry ironing. Once
water is in the tank, the steam boost can also
be used at higher temperatures for dry ironing.
KSI240_A5_130301.indb 19
1 1 2
3 4
5 6
Caution
Never directly point the steam boost into the
direction of people or animals!
Caution
Always iron on a heat-resistant surface only.
English
19
1/3/13 9:44 AM