Connections - Sveon SDT8100 Manual De Usuario

SDT8100usermanual:SDT8100 user guide 05/11/2012 12:09 Página 35
SDT8100 - User Guide
3 4
5 6
1 2

6. Connections

Antenna In/Out connection
- Antenna connection to the device. To receive Digital TV signal you must connect the home antenna to the "RF
IN" connector located in the rear panel of the device. You need ine antenna cable to make this connection.
- Device connection to the VCR. Connect one end of the antenna cable to the device antenna output ("RF Loop
Through") and the other end to the VCR. You need an extra antenna cable make this connection.
Scart connection
1. Connect the device to your TV screen through Scart connection (cable not included).
2. Connect the device to the power outlet, it will turn on automatically.
3. Select the Scart option in the TV input menu and wait while the system loading process.
HDMI connection
1. Connect the device to your TV screen through HDMI connection.
2. Connect the device to the power outlet, it will turn on automatically.
3. Select the HDMI option in the TV input menu and wait during the system loading process.
Important: The HDMI connection includes audio and video signal through the same cable with a great quality; you
don´t need to do more connections to enjoy both signals.
Coaxial connection
If you want to enjoy surround sound 5.1 connect SDT8100 to an audio system that can decode 5.1 audio signal
with a coaxial cable (coaxial cable not included)
www.sveon.com
35
English