AEB AEB1151 Manual Instrucciones De Montaje Y Garantia página 4

A.E.B. srl Via dell'Industria 20
42025 CAVRIAGO (RE) ITALY
Tel. 0522 - 941487 Fax 0522 - 941464
Technical Service Tel. 0522 - 942281
Assembly instructions and guarantee
Sensor for MV BRC R67 - 01 toroidal - type 30°
AEB standard
Code AEB1151
1) Place the sensor on the multivalve and fix it with
the relevant screws.
2) Insert the connector into the sensor and wire
as indicated in the assembly diagram of the
switch / indicator.
It is possible to carry out a small change of the kilometre number
that can be driven as reserve; by rotating the sensor in the seat of
the multivalve in counterclockwise direction, the kilometres that
you must drive as reserve are increase, while rotating it in
clockwise direction, they reduce.
STANDARD A.E.B.
L.P.G.
INDICATOR
SENSOR
WHITE WIRE
BLACK WIRE
GROUND
English
IS1151 Rev. 011001 - 0