Door Adjustment
Refer to the illustration and note on the screwdriver location for the desired adjustment.
LEFT TO RIGHT
door
FRONT TO BACK
door
UP AND DOWN
door
vanity side panel
vanity side panel
vanity side panel
If the gap between the door and vanity side panel needs
adjustment, turn the screw closest to the door clockwise or
counter clockwise.
Make sure to adjust both the top and bottom hinges to keep the
door level.
If the door is not aligned perfectly with the vanity frame, turn
the screw closest to the vanity side panel clockwise or counter
clockwise.
Make sure to adjust both the top and bottom hinges to keep the
door level.
If the gap above or below the door needs adjustment, turn the
screw that is mounted to the hinge plate of the vanity side panel.
Loosening the screw allows the door to move up or down.
Both hinges of the door need to be loosened to adjust the door.
Remember to tighten the hinges after the door is in place.
7