Bradley SN2008/IR Manual De Instalación página 8

SN2008/IR
Optional Towel Dispensers and 4-Inch Shroud
A
Attach Slip Ring to ceiling . Use (5)
1/4" screws (provided by installer), in
a 6" diameter circle .
B
Attach Dispensers, using them as a
guide for positioning mounting brackets .
C
Using supplied screws, secure base
of shroud to the sprayhead cover .
D
Connect base of vent pipe to
drain as described in Step 3 .
Optional Dispenser Mounting Brackets for 1-1/2" Pipe
Mount Brackets for a 1-1/2" pipe in a
A
similar manner to above . Secure brackets in
position using tie-bar supports as shown .
8
Mounting Bracket
Soap Filler Cap
12/04/2012
Vent Pipe (shown for
illustrative purposes)
Shroud
Pipe Cap
Mounting Bracket
Tie Bar
Spacer Sleeve
Bradley • 215-1069 Rev. J; ECN 12-00-004
Installation