Abit IN9 32X Manual De Usuario
  1. Manuales
  2. Marcas
  3. Abit Manuales
  4. Tarjeta Madre
  5. IN9 32X
  6. Manual de usuario

Abit IN9 32X Manual De Usuario

Ocultar thumbs
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
IN9 32X
IN9 32X
Motherboard
Socket 775
User's Manual
About this Manual:
This user's manual contains all the information you may
need for setting up this motherboard. To read the user's
manual of PDF format (readable by
the "Driver & Utility CD" into the CD-ROM drive in your
system. The auto-run screen will appear, click the
"Manual" tab to enter its submenu. If not, browse the
root directory of the CD-ROM via the File Manager, and
double click the "AUTORUN" file.
-MAX
Adobe
Reader), place
IN9 32X-MAX:
NVIDIA nForce 680i SLI
NVIDIA nForce 590 SLI MCP
IN9 32X:
NVIDIA nForce 680i LT SLI
NVIDIA nForce 570 SLI MCP
FSB 1333 MHz
Dual Channel DDR2 800
Triple PCI-E X16 Slots
Dual Gigabit LAN
8x SATA 3Gb/s including 2x
external SATA Connectors
USB 2.0 / IEEE1394
7.1-Channel HD Audio
abit uGuru™ Technology
abit Silent OTES™ Technology
External CMOS Clearing
Switch
Quick Power & Reset Button
Vista HW Ready

Publicidad

Tabla de contenido
loading

Manuales relacionados para Abit IN9 32X

Resumen de contenidos para Abit IN9 32X

  • Página 1 SATA Connectors USB 2.0 / IEEE1394 7.1-Channel HD Audio abit uGuru™ Technology abit Silent OTES™ Technology About this Manual: External CMOS Clearing This user’s manual contains all the information you may need for setting up this motherboard. To read the user’s...
  • Página 2 IN9 32X/IN9 32X-MAX User’s Manual English + Multilingual QIG P/N: 4310-0000-76 Rev. 4.00, March 2007 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.

  • Página 3: Tabla De Contenido

    2. BIOS Setup............... 2-1 ™ 2.1 μGuru Utility ................2-2 2.1.1 OC Guru ................2-2 2.1.2 ABIT EQ................2-5 2.2 Standard CMOS Features............2-11 2.3 Advanced BIOS Features ............2-13 2.4 Advanced Chipset Features............2-16 2.5 Integrated Peripherals ..............2-18...
  • Página 4 3.4 Silicon Image 3132 SATA Driver............ 3-3 3.5 AirPace Wi-Fi Wireless Driver ............3-4 3.6 USB 2.0 Driver ................3-4 3.7 abit μGuru ................... 3-5 3.8 Build NVRaid Floppy Disk Under Windows Environment ....3-6 3.9 Build SIL3132 SATA Floppy Disk Under Windows Environment..3-7 3.10 Build SIL3132 RAID Floppy Disk Under Windows Environment ..
  • Página 5 5.1 POST Code Definitions..............5-1 5.1.1 AWARD POST Code Definitions..........5-1 5.1.2 AC2005 POST Code Definitions..........5-4 5.2 Troubleshooting (How to Get Technical Support?)......5-5 5.2.1 Q & A ................. 5-5 5.2.2 Technical Support Form............5-8 5.2.3 Contact Information............. 5-9 IN9 32X/IN9 32X-MAX...
  • Página 6 IN9 32X/IN9 32X -MAX...

  • Página 7: Hardware Setup

    • 2x PCI-E X1 slots • Supports FSB 1333MHz • 2x PCI slots Chipset Internal I/O Connectors • IN9 32X-MAX: • 1x Floppy port NB: NVIDIA nForce 680i SLI • 1x Ultra ATA 133 IDE connector SB: NVIDIA nForce 590 SLI MCP •...

  • Página 8: Motherboard Layout

    ※ mainly based on model “IN9 32X-MAX”, unless specifically stated. For model “IN9 32X”, still you may refer to “IN9 32X-MAX”. They both have the same location and definition in headers, connectors, and jumpers, except a different chipset heatsink assembly.

  • Página 9: Choosing A Computer Chassis

    Install the motherboard with screws and have them tightened. To prevent shorting the PCB circuit, ※ please REMOVE the metal studs or spacers if they are already fastened on the chassis base and are without mounting-holes on the motherboard to align with. IN9 32X/IN9 32X-MAX...

  • Página 10: Checking Jumper Settings

    “EZ-CCMOS1”, see the section of “Connecting Rear Panel I/O Devices” in this manual for detail. The C.C. POST Code appears when either the external “EZ-CCMOS1” switch or ※ the internal “CCMOS1” jumper is not set to its normal position. IN9 32X/IN9 32X -MAX...
  • Página 11 Danger of explosion may arise if the battery is incorrectly renewed. ※ Renew only with the same or equivalent type recommended by the battery ※ manufacturer. Dispose of used batteries according to the battery manufacturer’s instructions. ※ IN9 32X/IN9 32X-MAX...

  • Página 12: Connecting Chassis Components

    This connector supplies power to CPU. The system will not start without connecting power to this one. ATX4P1: Auxiliary 12V Power Connector This connector provides an auxiliary power source for devices added on PCI Express slots. IN9 32X/IN9 32X -MAX...

  • Página 13: Front Panel Switches & Indicators Headers

    Connects to the Suspend LED cable (if there is one) of chassis front panel. • PWR (Pin 6, 8): Connects to the Power Switch cable of chassis front panel. • PLED (Pin 16, 18, 20): Connects to the Power LED cable of chassis front panel. IN9 32X/IN9 32X-MAX...

  • Página 14: Fan Power Connectors

    These connectors each provide power to the cooling fans installed in your system. • CPUFAN1: CPU Fan Power Connector • SYSFAN1: System Fan Power Connector • AUXFAN1~4: Auxiliary Fan Power Connector These fan connectors are not jumpers. DO NOT place jumper caps on these ※ connectors. IN9 32X/IN9 32X -MAX...

  • Página 15: Additional Cooling Fan For Nb Heatsink

    3. Secure the fan with two screws. (Slot PCIEXP1 might be in the way when fastening the screw, please proceed with care.) 4. Plug the fan power connector to the three-pin SYSFAN or AUXFAN header. 5. Now you have finished the attachment. IN9 32X/IN9 32X-MAX...

  • Página 16: Installing Hardware

    2. Use your right-thumb to raise the load plate. Lift it up to fully open position. 4. Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package. 1-10 IN9 32X/IN9 32X -MAX...
  • Página 17 7. Secure the lever with the hook under retention tab. A higher fan speed will be helpful for better airflow and heat-dissipation. ※ Nevertheless, stay alert to not touch any heatsink since a high temperature generated by the working system is still possible. IN9 32X/IN9 32X-MAX 1-11...

  • Página 18: Ddr2 Memory Slots

    DIMM module. Static electricity can damage the electronic components of the computer or ※ optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. 1-12 IN9 32X/IN9 32X -MAX...

  • Página 19: Pci Express X16 Add-On Slots (Install Graphics Card)

    These slots support the connections of graphics cards that comply with PCI Express specifications. This motherboard provides triple PCI-Express X16 slots: One PCIE graphics card installation (Normal Mode): Insert your PCIE graphics card into [PCIEXP1] (MASTER) slot. The [PCIEXP3] slot supports up to X8 bandwidth only. ※ IN9 32X/IN9 32X-MAX 1-13...
  • Página 20 The NVIDIA SLI technology ※ currently supports the Windows XP operating system only. 2. Bridge connecting two graphics cards with the “SLI Connector Card” (fit in both directions). Insert and secure the SLI supporting bracket. 1-14 IN9 32X/IN9 32X -MAX...

  • Página 21: Connecting Peripheral Devices

    Make sure to configure the “Master” and “Slave” relation before connecting ※ two drives by one single ribbon cable. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. IN9 32X/IN9 32X-MAX 1-15...

  • Página 22: Serial Ata Connectors

    SATA device and connect the other end from the power supply. The motherboard in this photo is served for DEMO only, and may not be the ※ same type or model as the one described in this user’s manual. 1-16 IN9 32X/IN9 32X -MAX...

  • Página 23: Additional Usb 2.0 Port Headers

    I/O panel or the front-mounted IEEE1394 port of your chassis. Pin Assignment Pin Assignment TPA0 + TPA0 - Ground Ground TPB0 + TPB0 - +12V +12V Ground Make sure the connecting cable bears the same pin assignment. ※ IN9 32X/IN9 32X-MAX 1-17...

  • Página 24: Internal Audio Connectors

    Pin 4 “AVCC” of this header. Pin Assignment Pin Assignment (HD AUDIO) (AC’97 AUDIO) MIC2 L MIC In AGND MIC2 R MIC Power AVCC FRO-R Line Out (R) MIC2_JD F_IO_SEN FRO-L Line Out (L) LINE2_JD 1-18 IN9 32X/IN9 32X -MAX...
  • Página 25 The audio driver is originally configured to support HD Audio. For AC’97 audio connection, you may: Right-click the “Realtek HD Audio Manager” icon system tray. Click “Audio I/O” tab, and then click “Connector Settings”. Click “Disabled front panel jack detection”, and then click “OK” to confirm. IN9 32X/IN9 32X-MAX 1-19...

  • Página 26: S/Pdif Output Connection Header

    This header provides the S/PDIF output connection to your add-on HDMI VGA card. Pin Assignment VCC (5V) S/PDIF Out Ground 1.8.8 PCI and PCI Express X1 Slot Install PCI Express X1 cards into slots “PCIE1” and/or “PCIE2”. Install PCI cards into slots “PCI1” and/or “PCI2”. 1-20 IN9 32X/IN9 32X -MAX...

  • Página 27: Guru Panel Connection Header

    1.8.9 Guru Panel Connection Header This header is reserved for connecting abit’s exclusive Guru Panel. For more information, please refer to the included Guru Panel Installation Guide. IN9 32X/IN9 32X-MAX 1-21...

  • Página 28: Onboard Indicators And Buttons

    This LED device also displays the “POST” Code of AC2005, an “uGuru” chipset developed exclusively by abit. The decimal point lights up during the AC2005 POST action. ※ See Appendix for both AWARD and AC2005 POST Code definitions. 1-22 IN9 32X/IN9 32X -MAX...

  • Página 29: Power Source Indicators

    SLI_PWR1: This LED lights up when the “ATX4P1” connector is NOT connected with power. 1.9.3 Onboard Buttons • PWRSW1: Push this button to power on the system. • RESET1: Push this button to reset the system. IN9 32X/IN9 32X-MAX 1-23...

  • Página 30: Connecting Rear Panel I/O Devices

    2-channel audio system. Mic-In: Connects to the plug from external microphone. • LAN1/LAN2: Connects to Local Area Network. • USB1/USB2: Connects to USB devices such as scanner, digital speakers, monitor, mouse, keyboard, hub, digital camera, joystick etc. 1-24 IN9 32X/IN9 32X -MAX...

  • Página 31: Bios Setup

    (C55XE-MCP55PX-6A61IA1AC-00) F6 : Save PROFILE To BIOS F7 : Load PROFILE From BIOS OC Guru & ABIT EQ ... NVIDIA Linkboost(TM) – Not Detected SLI-Ready Memory – Not Detected In order to increase system stability and performance, our engineering staff is ※...

  • Página 32: Μguru ™ Utility

    VGA card, or abnormal functioning with other add-on cards. Using non-specification settings for your CPU is not the intention of this explanation. These should be used for engineering testing, not for normal applications. IN9 32X/IN9 32X -MAX...
  • Página 33 This item selects the PCI Express bus frequency for connector [PCIEXP2/SLAVE]. SB PCIe X8 Clock This item selects the PCI Express bus frequency for connector [PCIEXP3]. SPP<->MCP REF Clock This item selects the HT reference clock frequency for MCP. IN9 32X/IN9 32X-MAX...
  • Página 34 X - HyperTransport Voltage 1.20 V :Move Enter:Select +/-/PU/PD:Value F8:OC On The Fly F10:Save ESC:Exit CPU Core Voltage DDR2 SDRAM Voltage DDR2 REF Voltage NB DDR2 REF Voltage CPU VTT Voltage NB Voltage SB Voltage HyperTransport Voltage IN9 32X/IN9 32X -MAX...

  • Página 35: Abit Eq

    :Move Enter:Select +/-/PU/PD:Value F8:OC On The Fly F10:Save ESC:Exit These items display the power cycle statistics for each element. 2.1.2 ABIT EQ Click right-arrow <→> key to switch from OC Guru setup menu to ABIT EQ setup menu: μGuru Utility v1.00C ABIT EQ...
  • Página 36 Use <Space> key to enable warning beeps function. Once the system has detected that the CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will sound. Beep Temp. This item selects the warning temperature limit. The shutdown temperature must be set above the warning temperature. ※ IN9 32X/IN9 32X -MAX...
  • Página 37 Use <Space> key to enable warning beeps function. If the voltage of corresponding element is higher/lower than the high/low limit, warning beeps will sound. High/Low Limit These items set the high and low voltage limit. The value of high limit must be set above the one of low limit. ※ IN9 32X/IN9 32X-MAX...
  • Página 38 Beep Enable Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit value, warning beeps will sound. Low Limit These items set the low limit of fan speed. IN9 32X/IN9 32X -MAX...
  • Página 39 Reference Temperature This item selects the reference point for taking temperature among the available options of CPU, SYS, and PWM Temperature, but there is only one “CPU Temperature” item to choose for the “CPU FanEQ Control”. IN9 32X/IN9 32X-MAX...
  • Página 40 DC Fan Voltage High/Low These items set the high and low voltage limit that you want to provide the fan with. The value of high limit must be set above the one of low limit. ※ 2-10 IN9 32X/IN9 32X -MAX...

  • Página 41: Standard Cmos Features

    Press Enter Item Help IDE Channel 1 Master Auto Access Mode Auto Capacity 0 MB Cylinder Head Precomp Landing Zone Sector :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults IN9 32X/IN9 32X-MAX 2-11...
  • Página 42 This item determines whether the system stops if an error is detected during system boot-up. [All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error. [No Errors]: The system-boot will not stop for any error detected. 2-12 IN9 32X/IN9 32X -MAX...

  • Página 43: Advanced Bios Features

    F7: Optimized Defaults Quick Power On Self Test When set to [Enabled], this item speeds up the Power On Self Test (POST) after powering on the system. The BIOS shorten or skip some check during the POST. IN9 32X/IN9 32X-MAX 2-13...
  • Página 44 This option enables or disables the additional hardware capabilities provided by Virtualization Technology. Frequency Unlimit This option enables or disables to unlock the multiplier factor for the processor you installed. This item appears only with certain unlocked processors. ※ 2-14 IN9 32X/IN9 32X -MAX...
  • Página 45 A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show This item determines to show the full screen logo when booting. IN9 32X/IN9 32X-MAX 2-15...

  • Página 46: Advanced Chipset Features

    You may manually set the DRAM timing parameters through the following sub-items, or leave them at their default settings according to the SPD (Serial Presence Detect) data stored in the DRAM. tCL (CAS Latency) tRCD tRAS Command Per Clock (CMD) 2-16 IN9 32X/IN9 32X -MAX...
  • Página 47 LinkBoost Select [Enable] to guarantee a higher clock with certified GPU. ECC Control Options: [Disabled], [Auto]. ECC Uncorrectable Options: [Disabled], [No Notify], [MCERR], [NMI], [SCI], [SMI]. ECC Correctable Options: [Disabled], [No Notify], [MCERR], [NMI], [SCI], [SMI]. IN9 32X/IN9 32X-MAX 2-17...

  • Página 48: Integrated Peripherals

    Phoenix – AwardBIOS CMOS Setup Utility OnChip IDE/RAID Device ► IDE Function Setup Press Enter Item Help ► RAID Configuration Press Enter :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 2-18 IN9 32X/IN9 32X -MAX...
  • Página 49 - SATA3 RAID Disabled x - SATA4 RAID Disabled x - SATA5 RAID Disabled x - SATA6 RAID Disabled :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults IN9 32X/IN9 32X-MAX 2-19...
  • Página 50 This item selects the mode for devices connected through eSATA1 ports. SATA Option ROM This item allows you to use the boot ROM of onboard SATA to boot up system. Onboard 1394 Controller This option enables or disables the IEEE 1394 controller. 2-20 IN9 32X/IN9 32X -MAX...

  • Página 51: Power Management Setup

    (Resume On Ring/LAN) prior to the date and time set in these items, the system will give priority to the incoming calls or network instead. IN9 32X/IN9 32X-MAX 2-21...
  • Página 52 If the system’s power is off when AC power failure occurs, it will remain off when power returns. If the system’s power is on when AC power failure occurs, the system will power-on when power returns. 2-22 IN9 32X/IN9 32X -MAX...

  • Página 53: Pnp/Pci Configurations

    IRQ-5 assigned to PCI Device IRQ-7 assigned to PCI Device IRQ-10 assigned to PCI Device IRQ-11 assigned to PCI Device :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults IN9 32X/IN9 32X-MAX 2-23...

  • Página 54: Load Fail-Safe Defaults

    This option protects the BIOS configuration or restricts access to the computer itself. 2.11 Save & Exit Setup This option saves your selections and exits the BIOS setup menu. 2.12 Exit Without Saving This option exits the BIOS setup menu without saving any changes. 2-24 IN9 32X/IN9 32X -MAX...

  • Página 55: Driver & Utility

    The screen shots in this chapter are snapped from model “IN9 32X-MAX”. ※ For model “IN9 32X”, the installation items remain the same, except a different background) 3.1 CD-ROM AUTORUN To run the CD-ROM automatically: Place the “Driver-&-Utility CD”...

  • Página 56: Nvidia Nforce Chipset Driver

    The installation screen appears. Follow the prompts on the screen to complete installation. After restarting the system, right-click the Sound Manager icon located at the desktop shortcut. Click item “Sound Manager”. The Realtek HD Audio Manager appears. IN9 32X/IN9 32X -MAX...

  • Página 57: Silicon Image 3132 Sata Driver

    “eSATA1”. To install this program: Click on the [Drivers] tab in the installation menu screen. Click the [Silicon Image 3132 SATA Driver] item. The installation screen appears. Follow the prompts on the screen to complete installation. IN9 32X/IN9 32X-MAX...

  • Página 58: Airpace Wi-Fi Wireless Driver

    Follow the prompts on the screen to complete installation. 3.6 USB 2.0 Driver There is no need to install this driver for Windows 2000 with Service Pack 4, ※ Windows XP with Service Pack 1, or their later version. IN9 32X/IN9 32X -MAX...

  • Página 59: Abit Μguru

    3.7 abit μGuru The abit μGuru combined with the optional Guru Panel allows you to access and select system performance of your system while playing games, listening music, browsing Internet or office applications in full screen with no need to stop or close the running application.

  • Página 60: Build Nvraid Floppy Disk Under Windows Environment

    SCSI or RAID driver. Press <F6> key, and then follow the screen instruction to complete the installation. To create a driver disk: Click on the [abit Utility] tab in the installation menu screen. Click the [Generate NVRaid Floppy Disk[32bit]] item.

  • Página 61: Build Sil3132 Sata Floppy Disk Under Windows Environment

    SCSI or RAID driver. Press <F6> key, and then follow the screen instruction to complete the installation. To create a driver disk: Click on the [abit Utility] tab in the installation menu screen. Click the [Generate SIL3132 Sata Floppy Disk[32bit]] item.

  • Página 62: Build Sil3132 Raid Floppy Disk Under Windows Environment

    SCSI or RAID driver. Press <F6> key, and then follow the screen instruction to complete the installation. To create a driver disk: Click on the [abit Utility] tab in the installation menu screen. Click the [Generate SIL3132 Raid Floppy Disk[32bit]] item.

  • Página 63: Build A Driver Disk Under Dos Environment

    Save this selection and exit BIOS setup menu by accessing the BIOS menu “Save & Exit Setup”. Restart the system. The system will now boot from CD, and enter the ABIT Boot Manager, the following options appear (0) Boot From First HDD...
  • Página 64 3-10 IN9 32X/IN9 32X -MAX...

  • Página 65: Multilingual Quick Installation Guide

    • [SLED]: Connecte au câble de la DEL de veille. l’installation de votre carte mère abit. Pour des opérations plus • [PWR]: Connecte au câble de l’interrupteur de l’alimentation avancées, vous devez vous reporter à la version complète.

  • Página 66: Deutsch//Kurze Installationsanleitung

    Diese “Kurze Installationsanleitung” enthält nur die Anschlüsse auf der Vorderseite: [FPIO1] grundlegenden Hardwareinformationen, die Sie zur [HLED]: Kabelanschluss für Festplattenzugriffsanzeige. • Installation Ihres abit-Motherboards benötigen. Details [RST]: Kabelanschluss für Rücksetzschalter. • finden Sie im ausführlichen Handbuch. [SPKR]: Kabelanschluss für Kabelanschluss für •...

  • Página 67: Italiano//Guida All'installazione Rapida

    • [PLED]: collega al cavo LED alimentazione. le informazioni di base sull’hardware necessarie all’installazione della scheda madre abit. Fare riferimento Collettore porta USB aggiuntiva: [FP-USB1], [FP-USB2] alla versione completa della guida per eseguire le Collettore porta IEEE1394 aggiuntiva: [FP-1394-1], [FP-1394-2] operazioni avanzate.

  • Página 68: Español//Guía Rápida De Instalación

    [PWR]: Conecte el cable del interruptor de encendido. • durante la instalación de la placa base abit. Para conocer el [PLED]: Conecte el cable del LED de encendido. • funcionamiento avanzado, es necesario consultar la Terminal de puerto USB adicional: [FP-USB1], [FP-USB2] versión completa.

  • Página 69: Português//Guia De Instalação Rápida

    à • [PWR]: Faz a ligação ao cabo do botão de alimentação. instalação da sua placa principal abit. Para mais • [PLED]: Faz a ligação ao cabo do LED do botão de alimentação.

  • Página 70: Русский//Краткое Руководство По Установке

    основная информация о техническом обеспечении, которая • [PLED]: Соединяется с кабелем индикатора питания. вам может понадобиться при установке материнской платы abit. Описание дополнительных операций вы найдете в Дополнительная насадка порта USB: [FP-USB1], [FP-USB2] полной версии руководства. Дополнительная насадка порта IEEE1394: [FP-1394-1], [FP-1394-2] Предостережения...

  • Página 71: Eesti//Kiirpaigaldusjuhend

    4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaigaldusjuhend” sisaldab ainult [SLED]: Ühendage peatusindikaatori (Suspend LED) • abit-emaplaadi paigaldamiseks vajalikku riistvaraalast kaabliga. põhiteavet. Edasijõudnud kasutamiseks tuleb teil ikkagi [PWR]: Ühendage toitelüliti kaabliga. • pöörduda täisversiooni poole. [PLED]: Ühendage toiteindikaatori (Power LED) kaabliga. • Täiendav USB-pordi päis: [FP-USB1], [FP-USB2] Ettevaatusabinõud riistvara paigaldamisel...

  • Página 72: Latviski//Ātrās Instalēšanas Instrukcija

    4.8 Latviski//Ātrās instalēšanas instrukcija Šī “Ātrās instalēšanas instrukcija” ietver tikai pamata [RST]: Pievieno atiestates slēdža kabeli. • norādes iekārtai, kas nepieciešamas, instalējot abit [SPKR]: Pievieno sistēmas skaļruņa kabeli. • mātesplati. Pilnīgākai darbībai nepieciešams iegūt [SLED]: Pievieno LED pārtraukšanas kabeli. •...

  • Página 73: Lietuvių//Trumpas Instaliavimo Vadovas

    [SLED]: Sujunkite su darbo pristabdymo indikatoriaus • informacija apie techninę įrangą, kurios jums gali prireikti kabeliu. instaliuojant pagrindinę plokštę abit. Papildomų operacijų [PWR]: Sujunkite su maitinimo tinklo jungiklio kabeliu. • aprašymą rasite pilnoje vadovo versijoje. [PLED]: Sujunkite su maitinimo indikatoriaus kabeliu.

  • Página 74: Polski//Instrukcja Szybkiej Instalacji

    [SLED]: Podłączenie kabla diody LED wstrzymania pracy. • podstawowe informacje dotyczące sprzętu, wymagane [PWR]: Podłączenie kabla przełącznika zasilania. • podczas instalacji płyty głównej abit. Przy [PLED]: Podłączenie kabla diody LED zasilania. • zaawansowanych operacjach, niezbędne będzie skorzystanie z kompletnej wersji instrukcji.

  • Página 75: Magyar//Gyorstelepítési Útmutató

    4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmutató” csak azt az alapvető [PWR]: Csatlakoztassa a tápkapcsoló kábelhez. • hardver információt tartalmazza, amely az abit alaplap [PLED]: Csatlakoztasson a táp LED kábelhez • telepítéséhez szükséges. Az előrehaladott üzemeltetéshez, Kiegészítő USB port fejrész: [FP-USB1], [FP-USB2] továbbra is a teljes útmutatót kell használnia.

  • Página 76: Türkçe//Hızlı Kurulum Kılavuzu

    4.12 Türkçe//Hızlı Kurulum Kılavuzu Bu “Hızlı Kurulum Kılavuzu”, abit anakartınızı takmanızda Ön Panel Konnektörleri: [FPIO1] gerekebilecek sadece temel donanım bilgisini içermektedir. [HLED]: Sabit Disk Sürücü LED kablosuna bağlayın. • İleri işlemler için daha geniş olan tam versiyonuna [RST]: Sıfırlama Anahtarı kablosuna bağlayın.
  • Página 77 ‫دﻟﻴﻞ اﻟﺘﺮآﻴﺐ اﻟﺴﺮﻳﻊ‬ ‫اﻟﻠﻐﺔ اﻟﻌﺮﺑﻴﺔ‬ 4.13 IN9 32X/IN9 32X-MAX 4-13...
  • Página 78 ‫راهﻨﻤﺎﯼ ﻧﺼﺐ ﺳﺮﻳﻊ‬ ‫ﻓﺎرﺳﯽ‬ 4.14 4-14 IN9 32X/IN9 32X -MAX...

  • Página 79: 日本語//クイックインストールガイド

    AUDIO1: 7.1ch オーディオ 入力/出力 コネクター。 ATX 電源装置: [ATXPWR1]、[ATX12V1] • IEEE1394: IEEE1394 プロトコルのデバイスに接続 ファンコネクタ: [CPUFAN1], [SYSFAN1], [AUXFAN1], します。 [NBFAN1] • LAN1: 構内通信網(LAN)に接続します。 • USB1/USB2: スキャナ、デジタルスピーカー、モニ 前面パネルコネクタ: [FPIO1] タ、マウス、キーボード、ハブ、デジタルカメラ、ジ • [HLED]: HDD LED ケーブルに接続 ョイスティックなどの USB デバイスに接続します。 • [RST]: リセットスイッチケーブルに接続 IN9 32X/IN9 32X-MAX 4-15...

  • Página 80: 한국어//빠른 설치 가이드

    4.16 한국어//빠른 설치 가이드 본 “빠른 설치 가이드”는 빅빔 abit 메인보드 • [SPKR]: 시스템 스피커 케이블에 연결하세요. [SLED]: 유휴(Suspend) LED 케이블에 연결하세요. • 설치에 필요한 중요한 하드웨어 정보만을 • [PWR]: 전원 스위치 케이블에 연결하세요. 포함하고 있습니다. 보다 상세한 정보 및 과정은...

  • Página 81: Bahasa Malaysia//Panduan Pemasangan Ringkas

    • maklumat perkakasan asas yang anda mungkin perlu [SPKR]: Sambungkan ke kabel Sistem Pembesar Suara. • semasa memasang papan induk abit anda. Untuk [SLED]: Sambungkan ke kabel Gantung LED. • pengendalian lanjutan, anda perlu rujuk ke versi [PWR]: Sambungkan ke kabel Suis Kuasa.

  • Página 82: ไทย//คู ่ ม ื อ การติ ด ตั ้ ง อย่ า งย่ อ

    เป็ น เพี ย งข้ อ มู ล พื ้ น ฐานที ่ จ ำเป็ น ใน [SPKR]:ต่ อ เข้ า กั บ สายลำโพงของระบบ • การติ ด ตั ้ ง แผงวงจรหลั ก abit ของคุ ณ เท่ า นั ้ น กรุ ณ า [SLED]:ต่ อ เข้ า กั บ สาย LED •...

  • Página 83: 繁體中文

    • 2 個 PCI-E X1 插槽 • 支援 1333MHz 前端匯流排 • 2 個 PCI 插槽 晶片組 內部輸入/輸出接頭 • IN9 32X-MAX: • 1 個軟碟埠 NB: NVIDIA nForce 680i SLI • 1 個 Ultra ATA 133 IDE 接頭 SB: NVIDIA nForce 590 SLI MCP •...

  • Página 84: 快速安裝略說

    AUDIO1: 7.1 聲道音效輸入/輸出連接。 • 前面板插座：[FPIO1] IEEE1394：連接 IEEE1394 通訊協定裝置。 • [HLED]：連接至硬碟 LED 連接線。 • LAN1：連接區域網路。 • [RST]：連接至重新啟動開關連接線。 • USB1/USB2：連接 USB 裝置，例如掃描器、數位喇 • [SPKR]：連接至系統喇叭連接線。 • 叭、顯示器、滑鼠、鍵盤、集線器、數位相機或搖 [SLED]：連接至暫停 LED 連接線。 • 桿等。 [PWR]：連接至電源開關連接線。 • [PLED]：連接至電源 LED 連接線。 • 4-20 IN9 32X/IN9 32X -MAX...

  • Página 85: 简体中文

    • 2 个 PCI-E X1 插槽 • 支持 1333MHz 前端总线 • 2 个 PCI 插槽 芯片组 内部输入/输出接头 • IN9 32X-MAX: • 1 个软盘端口 NB: NVIDIA nForce 680i SLI • 1 个 Ultra ATA 133 IDE 接头 SB: NVIDIA nForce 590 SLI MCP •...

  • Página 86: 快速安装略说

    [AUXFAN1]：辅助冷却风扇连接器。 • AUDIO1：7.1 声道音效输入/输出连接。 • [NBFAN1]：北桥冷却风扇连接器。 • IEEE1394：连接支持 IEEE1394 协议的设备。 • 前面板连接器：[FPIO1] LAN1：连接到局域网。 • [HLED]：连接 HDD LED 电缆。 • USB1/USB2：连接 USB 设备，如扫描仪、数码扬声 • [RST]：连接复位开关电缆。 • 器、监视器、鼠标、键盘、集线器、数码相机、操 [SPKR]：连接系统扬声器电缆。 • 纵杆等。 [SLED]：连接挂起 LED 电缆。 • [PWR]：连接电源开关电缆。 • 4-22 IN9 32X/IN9 32X -MAX...

  • Página 87: Appendix

    Prepare BIOS resource map for PCI & PnP use. If ESCD is valid, take into consideration of the ESCD’s legacy information. Early PCI Initialization: -Enumerate PCI bus number. -Assign memory & I/O resource -Search for a valid VGA device & VGA BIOS, and put it into C000:0 IN9 32X/IN9 32X-MAX...
  • Página 88 2. Auto assign ports to onboard COM ports if the corresponding item in Setup is set to “AUTO” 1. Initialize floppy controller 2. Set up floppy related fields in 40:hardware Detect & install all IDE devices: HDD, LS120, ZIP, CDROM … IN9 32X/IN9 32X -MAX...
  • Página 89 Update keyboard LED & typematic rate 1. Build MP table 2. Build & update ESCD 3. Set CMOS century to 20h or 19h 4. Load CMOS time into DOS timer tick 5. Build MSIRQ routing table Boot attempt (INT 19h) IN9 32X/IN9 32X-MAX...

  • Página 90: Ac2005 Post Code Definitions

    Complete power off sequence Others Either the external “EZ-CCMOS1” switch or the internal “CCMOS1” jumper is not C.C. set to its normal position. F.0. Button reset F.1. SoftMenu reset F.2. Power on sequence timeout F.3. Power off sequence timeout IN9 32X/IN9 32X -MAX...

  • Página 91: Troubleshooting (How To Get Technical Support?)

    If the situation remains the same, try Step 3. Step 3. The same procedure as Step 2, but while discharging the CMOS data, pull out the ATX power connectors from motherboard and remove the button battery during CMOS discharge. IN9 32X/IN9 32X-MAX...
  • Página 92 Example: Intel 650 3.4GHz (OC FSB=220MHz) • Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) • Memory size: Type in the size of your memory module. Example: 512M* 4PCS IN9 32X/IN9 32X -MAX...
  • Página 93 See the next page for a blank Technical Support Form, or visit our website to fill in the form on line (http://www.abit.com.tw/page/en/contact/technical.php). Q. Is the motherboard dead? Do I need to return it to where I bought from or go...

  • Página 94: Technical Support Form

    First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: IN9 32X/IN9 32X -MAX...

  • Página 95: Contact Information

    Universal ABIT (USA) Corporation 2901 Bayview Drive, Shanghai Fremont, CA 94538, U.S.A. Tel: 1-510-623-0500 Universal ABIT (Shanghai) Co. Ltd. Fax: 1-510-623-1092 FL 19 Xuhui Yuan BLOG NO.1089 Website: http://www.abit-usa.com ZhongShan s 2 RD, ShangHai 200030 The People's Republic of China Latin America: r aymond@abit-usa.com...
  • Página 96 P/N: 4310-0000-76 Rev. 4.00...

Este manual también es adecuado para:

In9 32x-max

Tabla de contenido