Battery Charging; Cleaning And Maintenance; Technical Specifications - Perel EWL421NW-R Manual Del Usuario

4. Battery
This device contains an internal rechargeable battery. When the device
reaches end-of-life, it must be disposed of in accordance with local
5.

Battery Charging

Fully charge the battery prior using the device. Failure to do so may
It is strongly recommended to maintain the battery at 60 % charge when
1. Connect the device to the mains using the included adapter.
2. Disconnect from the mains after ± 5 h.
6. Operation
1. Switch on the device. Select the light mode and aim towards the area to be illuminated.
2. Switch off after use.
7.

Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning
solvents or strong detergents.
8.

Technical Specifications

body colour
battery
type
nom. voltage
typ. capacity
run time 50 %
run time 100 %
charging time
electrical data
power LED module
total nominal power
light technical data
colour
colour temperature
beam angle
luminous flux – 50 %
luminous flux – 100 %
colour rendering index
starting time
warm-up time (60 %)
V. 04 – 20/02/2018
EWL421NW-R/EWL422NW-R
decrease the life of the internal battery.
the device is not in use.
The device can be used simultaneously while charging.
EWL421NW-R
20 x SMD2835 LED
WARNING
regulations.
WARNING
REMARK
yellow
Li-ion
7.4 V
2600 mAh
± 4.4 h
± 2.2 h
± 5 h
10 W
neutral white
4000 K
300 lm
600 lm
< 0.5 s
< 1 s
3
EWL422NW-R
5200 mAh
36 x SMD2835 LED
20 W
120°
600 lm
1200 lm
> 70
©Velleman nv