Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
NOTE: TO ENSURE AN EASIER ASSEMBLY, WE STRONGLY ADVISE
ONLY FINGER TIGHTENING BOLTS DURING INITIAL ASSEMBLY. ONCE
ALL BOLTS ARE INSERTED, FULLY TIGHTEN ALL BOLTS. DO NOT
OVERTIGHTEN.
NOTE: BOLTS SHOULD BE INSERTED FROM THE OUTSIDE OF THE
FIRE PIT.
H
STEP 1
Turn the scrollwork [D] upside
E
down on a soft surface to protect
the finish.
Place the base [E] upside down
on the bottom of the scrollwork.
I
Insert three M6 x 12 bolts [G]
G
D
through Ø6 x 16 washers [I],
then through the bottom of
the scrollwork and into the
base. Secure with M6 nuts [H]
on the other side.
Tighten all fasteners and turn
the fire pit upright.
8 | www.bluesk youtdoorliving.com
Publicidad
Tabla de contenido
