Care And Storage; Troubleshooting Guide; Specifications; Fcc Statement - Beurer TL 50 Manual De Instrucciones

Lámpara de luz diurna
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Care and Storage

• Before cleaning the unit, always switch it off, unplug it, and let it cool.
• Do not immerse unit in water or other liquids. Use a slightly damp cloth to clean the device. Do not use
abrasive detergents.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed onto the
unit. The unit must be operated only when it is completely dry.
• If you are not going to use the device for an extended period of time, disconnect it and store it in a dry
place, out of the reach of children.

6. Troubleshooting Guide

Problem
Device does not light up

7. Specifications

Dimensions (WxHxD)
Weight
Lighting elements
Power
Light intensity
Radiation
Operating conditions
Storage conditions
Product classification
Color temperature
Power Adapter Input
Power Adapter Output
Polarity

8. FCC Statement

Changes or modifications to the product not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
Possible cause
On/Off Button switched off.
No electricity.
LEDs have reached the end of their
service life or are faulty.
10.7" x 9.7" x 5.7" (27.1 x 24.6 x 14.5 cm)
23 oz. (650 g) [27 oz. (763 g) including AC Power Adapter]
LED
36 Watts
approx.10,000 lux (@10 cm)
Output of radiation beyond the visible spectrum (infrared and UV) is so low
that it is harmless to eyes and skin.
41° - 95° F (5° - 35° C), 15 - 90 % relative humidity
-4° - 122° F (-20° - 50° C), 15 - 90 % relative humidity
External power supply, Protection class II, IP21
5.300 K
100–240 VAC ~50/60 Hz
24 VDC, 1.5 A
Center Positive
5
Solution
Press the On/Off Button.
Power cord is faulty or not con-
nected to a working outlet. Contact
customer service for assistance.
Contact customer service for repair
or replacement.

Publicidad

Tabla de contenido
loading

Tabla de contenido