Kensington Charge and Sync Cabinet, Universal tablet Manual De Instrucciones página 11

Charge the Tablets
Charging automatically begins when the dock connector is plugged into the iPad.
NOTE: The Charge and Sync Cabinet will not charge and sync the tablets at the same time.
LED Status
Green = Charged
Red = Charging in progress
Red and Green Flashing = Sync in process
Red Flashing = Over current protection
NOTE: Remove the Device and turn off the AC power for over current reset.
Configuring Your Charge & Sync Cabinet for iPads®
If you need to sync the classroom's iPads using your laptop or desktop, simply visit Apple's
Configuration page at http://help.apple.com/configurator/mac/1.0/?lang=en-
us#cadf1802aed to learn more. The site has all the information you need with easy to follow
directions.
Sync
iTunes Setup
1 Launch the iTunes
2 Under Preferences, click on the Advanced tab. Uncheck Check for new software updates
automatically. This will prevent the automatic update process from interfering with the
syncing process.
3 Click on the Device tab, make sure all options are unchecked.
application on the host computer.
10