Practical Tips - Babyfon BM 550 ECO Instrucciones De Uso

GB
Babyfon BM 550 ECO
Babyfon® is one of the leading brands for wireless baby monitors in Europe. We have
devoted ourselves for many years to the development and production of reliable, high-
quality products. The Babyfon BM 550 ECO continues in this long-standing tradition.
A Baby device
1 On/Off/Channel selector switch
2 Power-on lamp
3 Microphone
4 Sensitivity setting
5 AC adapter connector
6 AC adapter
7 Battery compartment lid
8 Screw for battery compartment lid
9 Battery compartment
10 Charging contact for battery pack
11 Belt clip
B Parent device
12 On/Off/Channel selector switch
13 Power-on lamp
14 Speaker
15 Reception control indicator
16 Volume control
17 AC adapter connector
18 AC adapter
19 Battery compartment lid
20 Screw for battery compartment lid
21 Battery compartment
22 Charge contacts for battery pack
23 Belt clip
24 Battery pack
Important information
Please read these instructions carefully. This Babyfon is only intended as an aid. It is not
a substitute for responsible, correct parental supervision and should therefore not be used
as such.
●
Never place the Babyfon and the connecting cable within the baby's reach; please
observe a minimum distance of 1 metre.
●
Never place the baby device in the baby's cot or playpen.
●
Never use the Babyfon near water or in damp places.
●
Avoid exposure to extreme heat or strong light.
●
Never open the housings or AC adapters (danger of electric shock!).
●
Make sure that the local mains voltage corresponds to the voltage specified on the
AC adapter.
●
Avoid touching the battery and charging contacts. Do not touch the contacts with
metal objects.
10
GB

Practical tips

Conventional wireless baby monitors create electrical, magnetic and electromagnetic
fields. Due to the special shielding of the BM 550 ECO, electrical and magnetic fields are
no longer detectable at a distance of 30 cm. Electromagnetic fields are produced by
wireless transmission and are not entirely avoidable. Therefore place the baby device at
least 1 metre away from the baby.
●
Never cover the baby device (e.g. with a towel, sheet, etc.)
●
Use a damp cloth to clean the Babyfon
Preparing your Babyfon
1. Place the baby device at least 1 metre away from your baby.
Never place the baby device in the cot or the playpen.
2. Connect the AC adapter to the connector on the baby device.
3. Plug the AC adapter into a mains socket as far away from the baby as possible.
4. Switch on the baby device by selecting channel A or B.
5. Take the parent device and move away from the baby device. If the units are placed
too close together, there may be a high-pitched whistling sound.
6. Connect the second AC adapter to the connector on the parent device.
7. Plug the second AC adapter into a mains socket.
8. Switch on the parent device and select the same channel as on the baby device.
9. Your Babyfon is now ready for use. Transmission begins automatically when the baby
device is activated by a noise.
10. Using a radio, for example, you can test whether transmission is ensured at the
location you have chosen.
11