Glacier bay 67732W-6001 Guía De Instalación Y Cuidado página 7

Installation (continued)
7
Attaching the horizontal rod and strap
□
Press the horizontal rod (N) down to ensure the stopper (H) is in the maximum open position.
□
Slide the clip (P) upward, adjust the location of the lift rod strap (O) to the appropriate height and insert
the horizontal rod (N) with the correct hole of the lift rod strap (O).
□
Move the lift rod strap (O) in or out to choose an appropriate location.
□
Slide the clip (P) downward until it secures with the horizontal rod (N).
H
1
N
Hole
8
Adjusting the length of lift rod strap (optional)
□ If the pop up lift rod strap (O) is interfering with your installation, as shown in Fig. 1, the lift rod strap (O)
can be cut shorter.
□
Once you have identi ed the proper hole in the lift rod strap (O) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (O) by snapping it off with pliers or cutting it off with
a saw at the cutting point (2), as shown in Fig. 2. Ensure the clip (P) does not slide off the lift rod strap (O).
Fig. 1
O
P
2
P
3
3
O
O
H
O
P
N
O
P
7
Please contact 1-855-HD-GLACIER for further assistance.
H
N
1
2
Fig. 2
HOMEDEPOT.COM
O
P
5