Glacier bay 67579W-6301 Manual De Instrucciones página 7

Installation (continued)
7
Adjusting the length of lift rod strap (optional)
□
If the pop up lift rod strap (K) is interfering with your installation, as shown in Fig. 1, the lift rod strap (K)
can be cut shorter.
□
Once you have identi ed the proper hole in the lift rod strap (K) that is necessary for your installation, you
may cut off the bottom portion (1) of the lift rod strap (K) by snapping it off with pliers or cutting it off with
a saw at the cutting point (2), as shown in Fig. 2. Ensure the clip (L) does not slide off the lift rod strap (K).
Fig. 1
8
Checking the operation of the
pop-up
□
Operate the lift rod (M) up and down to verify
that the stopper (D) opens and closes correctly.
K
K
7
Please contact 1-855-HD-GLACIER for further assistance.
2
K
L
Fig. 2
D
1
M
HOMEDEPOT.COM