1.
Toasting slots
2.
Lever for breadlift
3.
Removable crumbtray
4.
Button for browning control
5.
Cancel button
6.
Reheat button
7.
Defrost button
Before you use the appliance for the first time, please do as follows: Unpack the appliance carefully and remove all the
packaging material and any promotional stickers. Keep the material (plastic bags and cardboard) out of reach of children.
Check the appliance after unpacking for any visible damage, that could be caused by transportation.
Before plugging into a socket, check that the voltage in your home corresponds with the voltage printed at the bottom of the
appliance. Place the appliance on a stable and heat resistant surface.
Wipe the housing of the appliance only with a damp cloth. Note: the new appliance can give off a bit of smoke and the typically
'new' smell. It is therefore advisable to switch the appliance on several times at the highest setting without bread inside.
Use the toaster only for toasting bread. Do not prepare sandwiches in the toaster. If you do, cheese and fat can come onto the
heating elements which can shorten the lifetime of the appliance.
The toaster is suited to toast two slices of bread at once. Put the plug into the socket.
• Adjust the browning control with the control
• Place one or two slices of bread into the toasting slot.
• Push the bread lift lever straight down to lower the slices. The indicator light in the CANCEL button lights up.
• Once the toasting cycle has finished, the appliance will automatically switch off and the lever will return to it's original
position, lifting the toasted slices.
The browning level is adjustable; position 1 is light and position 7 is dark.
APPLIANCE DESCRIPTION
3
BEFORE THE FIRST USE
TOASTING BREAD
knob.
EN - 11
7
6
5
1
2
4