Package Contents; Product Specifications - VWR Hotplate W10 Manual De Instrucciones

Package Contents

Description
Hotplate W10
Power cord (EU-plug, UK-plug)
Instruction manual
Installation
Unpack the delivery. Check that the unit is not damaged and that all parts are included.
Place the unit on the work area. Connect the unit to an electrical grounded mains power socket, use the units
power cord (which has a with ground connection).
Check that the unit is OFF; no lights on the power switch or display. (If the unit is ON, green light on the power
switch and red light on the display, then press the down side of the power switch, the lights goes OFF.)
Intended use and overview
The product is for use at a pathology/histology laboratory for in vitro diagnostics, for preparation of human tissue
sections on glass slides for microscopy. The units casing is made of white powder coated aluminium. The heated
surface is black anodized.
The unit is equipped with a power switch with green light, a temperature control unit with digital display, internal
heating element and an overheat protection fuse.

Product Specifications

Mains power:
Power consumption:
Temperature range:
Thermostat:
Temp. accuracy:
External dimensions:
Weight:
Quantity
1
2
1
230 VAC 50/60Hz
260 W
+20 to +89°C
Digital
±1°C
W:146 x D:486 mm x H:70 mm
3,1 kg
3 (28)
Instruction Manual (GB)