Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting External Video Sources
The FRONT panel jacks are provided as a convenience to allow you to easily connect a camcorder , DVD, Video
Game and a VCR as shown in the following examples:
PHOTO INPUT
PUSH EJECT
Note : Special device cables will be
according to the own device
specifications.
NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the
played back picture may be abnormal.
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set
Top Box to your Plasma TV is dependent on the model and features of each component. Check the
owner's manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to
accommodate your particular assortment of components and features. For best performance, video and
audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD (
the SELECT button or the CURSOR PAD
16
FRONT INPUT PANEL
OUTPUT
Video
COMPOSITE VIDEO
OUTPUT CAPABILITY
Video Game
DVD , Video Game
Console.
and
) to select the Input of your choice. Then press
to confirm your choice (see page 26).
HDMI-Front
Photo Input
Air /
Cable
Input 1
Input 2
Move
SEL Sel.
Note : For Monoaural devices, please
connect Audio signal cable into
L/Mono input jack .
L
R
Video Camera
Publicidad
