Aspira ECOCOMFORT Serie Manual De Uso E Instalación página 14

If instead mounted on two corner walls, the centers of the drill holes must be respectively located at 1.2 meters
from the opposite wall (fig. 2b).
1.2m
Figure 2a
DO NOT PLACE THE DEVICE ON DELICATE FURNITURE
OR PAINTINGS. DO NOT PLACE THE DEVICE ON OR
NEAR THERMOSTATS.
7. INSTALLATION OF THE TELESCOPIC TUBE
1. Using the handle, pull out the
heat exchanger as shown in
Figure 3.
2. Dust the newly drilled hole with cement
mortar.
3. Insert the telescopic tube making sure
that the larger diameter tube is flush
with the outer wall (Figure 4).
14
Figure 2b
HANDLE
ROOM
TUBE
INTERNAL
E N G L I S H
ECOCOMFORT Series
1.2m
HEAT EXCHANGER
INTERNAL TUBE
TUBE
EXTERNAL
EXTERNAL TUBE
Figure 3
EXTERNAL
EXTERNAL TUBE
FLUSH WITH
THE WALL
Figure 4