QFX PBX-3080BT Manual Del Usuario página 4

PBX-3080BT
PBX-3080BT FRONT PANEL
1. LINE1 Input (RCA): The RCA Input is designed to connect directly to a CD/DVD/TV or any
other stereo level audio device.
Please note that there are two LINE Inputs, RCA and 1/8". If both the RCA and 1/8"inputs are
connected the unit is automatically play from the 1/8" Line input. To play from the RCA Line
input, please disconnect the 1/8" connection from the 1/8" Line Input.
2. LINE2 Input(1/8"): The 1/8" Line Input is designed to connect directly to a mp3 player or any
other stereo level audio device. Please note that there are two LINE Inputs, RCA and 1/8". If
both the RCA and 1/8"inputs are connected the unit is automatically play from the 1/8" Line
input.
3.Power Supply: The power switch should be set to the off position before the power supply is
connected.
4.Voltage Selector 120V-240V. Be sure the unit's voltage in the outlet you are using.
5. Power Button: Press this button to power the unit on, off or to charge the unit. If the battery
needs to be charged, set the unit to AC and connect the power cable to the rear of the unit.
When set to AC, the unit can also be powered by an external power supply (electrical outlet)
even if the battery is dead. In this case you need to have the unit set to the voltage corresponding
to the voltage of the outlet. To turn the unit off set the power button to OFF. It is recommended
to fully charge the battery prior to using the unit for the first time. It is also recommended to
charge the battery at least every 2-3 months to keep the battery operating to it highest capacity.
6.12V FUSE:Provided battery is damaged or internal short circuit, the fuse will be burnt in order
to protect the machine &battery. The unit can work well after replace a new fuse.
7.DC 12V IN is for connecting to 12V external battery if needed.
8.Antenna is for receiving the FM signal. Before use, pull up the telescopic FM antenna. After
use,pack up the FM antenna to better protect it.
-3-