GE RM94902 Manual De Instrucciones página 12

94902 Revised Size 2/25/02
Exiting the Menu Mode:
To exit the Menu Mode
and clear the screen push
the DEVICE button on the
remote. The INDICATOR
LIGHT should go out
indicating the remote
is now out of Menu Mode
and will revert to it's
normal mode of operation.
NOTE: The remote will automatically exit the Menu
Mode after 10 seconds of inactivity with no buttons
being pushed.
Special Notes:
1. Because of the wide variety of menu
formats, some experimenting may
be required.
2. SONY: Pressing the ENTER button while in
Menu Mode returns to previous menu.
3. ZENITH: Push the MENU button a second
time to move from the SET-UP Menu to the
VIDEO Menu.
Operating a T V / VC R C o m b o
Some TV/VCR combination units may be controlled
by using a combination of TV and VCR codes. For
example, the Samsung TV/VCR combo unit may be
controlled by both the Samsung TV code and the
Samsung VCR code.
GE, RCA and ProS can Brand Devices:
Many of these devices (TVs and VCRs) do not need
to be programmed. In the event that programming
is required, the code search method is suggested.
Note: With these brands, the device button (TV,
VCR) will usually turn the units on. The OFF/ON
button will only turn these devices off.
Low Batter y Warning:
When your batteries are weak, the Indicator Light
will blink indicating it is time to change batteries.
4:03 PM Page 12
11