LG WM9500H-A Serie Manual Del Propietário página 31

TM
Turbo Wash
Adding this option reduces the cycle time while still
providing similar wash performance to the same
cycle without Turbo Wash
NOTE
• This option cannot be used with all cycles.
• This option defaults to on for Normal, Heavy
Duty and Perm.Press wash cycles.
Cold Wash
Press the Cold Wash button to save energy by
using cooler water. It will increase the wash and
rinse times to maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads (less
than 8 lb) with this option.
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press the Extra Rinse button to add additional
rinses to the cycle.
Drum Light
The drum is equipped with a white LED light that
illuminates when the washer is turned on. This
light automatically turns off when the door is
closed and the cycle starts.
• Press and hold the Extra Rinse button for 3
seconds during the cycle to turn on the drum
light.
• The drum light will turn off automatically after 4
minutes.
Using the Pre-wash Option
This option adds a pre-wash (for about 15 - 17
minutes) for improved cleaning of heavily soiled
or stained clothing.
NOTE
• If you select Pre Wash after putting the
detergent directly in the drum, the detergent
TM
.
may be washed away, reducing the washing
performance.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternately shown on the
display during the wash cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Pre Wash button for 3
seconds to activate/deactivate this function.
• When the function is deactivated, a chime will
sound and the remaining time for the current
cycle will reappear on the display.
OPERATION 31
and the
CL