Publicidad
Step3.
Align and insert ASRock 3-Way SLI Bridge Card to the goldfingers on each
graphics card. Make sure ASRock 3-Way SLI Bridge Card is firmly in place.
ASRock 3-Way SLI Bridge Card
Step4.
Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
2.5.2 Driver Installation and Setup
2.5.2 Driver Installation and Setup
2.5.2 Driver Installation and Setup
2.5.2 Driver Installation and Setup
2.5.2 Driver Installation and Setup
Install the graphics card drivers to your system. After that, you can enable the Multi-
Graphics Processing Unit (GPU) feature in the NVIDIA
follow the below procedures to enable the multi-GPU feature.
®
For Windows
XP / XP 64-bit OS:
TM
(For SLI
mode only)
A. Double-click NVIDIA Settings icon on your Windows
B. From the pop-up menu, select Set SLI and PhysX configuration. In Set
PhysX GPU acceleration item, please select Enabled. In Select an SLI
configuration item, please select Enable SLI. And click Apply.
C. Reboot your system.
D. You can freely enjoy the benefit of SLI
ASRock X58 Deluxe3 Motherboard
®
nView system tray utility. Please
®
taskbar.
TM
feature.
2 3
2 3
2 3
2 3
2 3
Publicidad
