ASROCK X58 Deluxe3 Manual Del Usuario página 28

Step 3.

Connect the DVI monitor cable to the DVI connector on the Radeon graphics

card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert the DVI

connector to D-Sub interface, and then connect the D-Sub monitor cable to the

DVI to D-Sub adapter.)

2.6.2 Driver Installation and Setup

Step 1.

Power on your computer and boot into OS.

Step 2.

Remove the ATI

The Catalyst Uninstaller is an optional download. We recommend using this

utility to uninstall any previously installed Catalyst drivers prior to installation.

Please check AMD website for ATI

Step 3.

Install the required drivers to your system.

For Windows

A. ATI

recommends Windows

installed (If you have Windows

in your system, there is no need to download it again):

http://www.microsoft.com/windowsxp/sp2/default.mspx

B. You must have Microsoft .NET Framework installed prior to

downloading and installing the CATALYST Control Center. Please

check Microsoft website for details.

For Windows

Install the CATALYST Control Center. Please check AMD website for details.

Step 4.

Restart your computer.

Step 5.

Install the VGA card drivers to your system, and restart your computer.

Then you will find "ATI Catalyst Control Center" on your Windows

(Driver Version: 8-12_vista32_dd_ccc_wdm_enu_72275.exe)

ATI Catalyst Control Center

2 8

driver if you have any VGA driver installed in your system.

driver updates.

XP OS:

XP Service Pack 2 or higher to be

XP Service Pack 2 or higher installed

Vista

OS:

ASRock X58 Deluxe3 Motherboard

taskbar.