MZ electronic NAUTI 011-X Instrucciones De Uso página 18

Setting up to count in feet
1
Press
2
Press
3
Then the gipsy circumference
programmed in the factory (13")
will be displayed.
4
Press
number on
reaching the value corresponding
to the length of chain on the gipsy.
Press
value by one unit (e.g. 12").
5 On reaching the set value wait for
5 seconds.
INCHES will run across the display
screen.
6 At this point the instrument will set
up to count chain deployment in
feet – in 1, 2 or 3 foot increments
depending on the size of the gipsy.
Note
IF PROGRAMMING OPERATIONS ARE SUSPENDED FOR MORE THAN 60
SECONDS
PREVIOUSLY SET DATA.
NAUTI 011-X
for three second.
.
to increase
the display
to decrease the set
The words
THE INSTRUMENT
the
until
SET
WILL AUTOMATICALLY
English
RELOAD THE
Rev. 03 – 2009