Error Displays/Messages - Sony XAV-72BT Manual De Instrucciones

Error displays/messages

Bluetooth device is not found.
The unit cannot detect a connectable Bluetooth device.
t Check the Bluetooth setting of the connecting
device.
Busy now... Please try again.
The unit is busy.
t Wait for a moment and try again.
Cannot read.
• The unit cannot read the data due to some problem.
• The data is damaged or corrupted.
• The disc is corrupted.
• The disc is incompatible with this unit.
• The disc is not finalized.
Disc Error
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• The disc is not compatible with this unit.
t Insert a compatible disc.
• Press Z to remove the disc.
Disc Reading...
The unit is reading all file/album (folder) information
on the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
Error
• The USB device was not automatically recognized.
t Reconnect it again.
• Phonebook content has changed during cellular
phone access.
t Access the phonebook again.
• Phonebook access was disconnected by the cellular
phone.
t Access the phonebook again.
• Phonebook download from the cellular phone failed
due to a problem.
t Download the phonebook again (page 38).
• Phonebook browsing from the cellular phone failed
due to a problem.
t Retry browsing (page 39).
• Phonebook listing from the cellular phone failed due
to a problem.
t Retry listing (page 39).
Error - Please select 'initialize' from the
Bluetooth settings menu.
A memory error has occurred.
t Initialize the Bluetooth setting (page 42).
FAILURE (Displays for about 1 second.)
When the SAT tuner is connected, storing a SAT radio
channel in a preset failed.
t Be sure to tune to the channel that you want to
store, then try it again.
Handsfree device is not available.
A cellular phone is not connected.
t Connect a cellular phone (page 35).
Hubs not supported.
USB hubs are not supported on this unit.
Local Seek +/Local Seek –
The local seek mode is on during automatic tuning.
No device found.
No device is in the list of registered Bluetooth device.
t Perform pairing with a Bluetooth device (page 33).
No playable data.
The disc does not contain playable data.
No SensMe™ data on device.
The connected USB device does not contain data for
the SensMe™ function, or the data has been moved to
an improper location on the USB device.
Offset
There may be an internal malfunction.
t Check the connection. If the error indication
remains on the display, consult your nearest Sony
dealer.
Output connection failure.
(Displays until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the supplied "Installation/Connections" guide
to check the connection.
Overcurrent Caution on USB
The USB device is overloaded.
t Disconnect the USB device, then change the source
by pressing (SOURCE/OFF).
t Indicates that the USB device is out of order, or an
unsupported device is connected.
Playback prohibited by region code.
The DVD's region code differs from the unit's region
code.
Please push reset.
This unit or USB device cannot be operated due to a
problem.
t Press the reset button (page 14).
SensMe™ data Reading...
The unit is reading all data for the SensMe™ function
in the connected USB device.
t Wait until reading is complete. Depending on the
amount of data, etc., it may take time.
The connected USB device is not supported.
For details on the compatibility of your USB device,
visit the support site.
The SensMe™ data is corrupted.
The data for the SensMe™ function has a problem,
such as altered file name, information, etc.
USB device is not connected.
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
continue to next page t
69