Handset Reset - ClearSounds A600E Instrucciones De Uso

and exit. The handset name will be displayed above your
handset number in standby mode.
NOTE: If you make a mistake while entering the name, use the
Erase soft key to correct it. Each time you press this key, the
last character is deleted.
█

Handset Reset

This function allows you to reset the handset settings for Alarm,
Audio Setup, Ring Setup, Tone Setup, Language, HS Name,
Auto Answer and Date & Time to the initial factory settings. To
reset the handset:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key. You will be prompted to enter
the PIN.
4. Enter the PIN (the default PIN is 0000) and then press
the Reset soft key. If the PIN is validated, the handset
settings will be reset to the initial factory settings,
otherwise the settings will remain.
5. After resetting, the handset will return to standby
mode.
█ Base Selection
This function allows you to select a base from those already
registered to the handset.
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
then press the Select soft key.
4. Press up
and then press the Select soft key. If you select a non-
existent base, the handset will sound a warning tone.
or down
or down to scroll to HS Reset and then
or down
or down
or down
11 – ENGLISH
to scroll to HS Settings and
to scroll to HS Settings and
to scroll to Select Base and
to select the base you want