Medion Life P13225 Guía Rápida página 92

3.7.4. Satellite
If you have previously activated the reception type
antenna type.
 To set the antenna type, select one of the following antenna types:
− : Select this antenna type if you have a single receiver and a satellite antenna. Press
DIRECT
the OK button and then choose the desired satellite (you can also call up the transponder list
using the blue button). Afterwards, press the
decide whether or not the channel list should be loaded.
− : Select this antenna type if you have multiple receivers and a single-cable system.
UNICABLE
Press the button and make all the necessary settings regarding
O K
and
USER BAND BAND FREQUENCY
blue button). Afterwards, press the
whether or not the channel list should be loaded.
− : Select this antenna type if you have multiple satellite antennas and a DiSEqC
DISEQC SWITCH
switch. Press the
call up the corresponding transponder list using the blue button). Afterwards, press the
button again to start the search. After that, decide whether or not the channel list should be
loaded.
During the search, the scan progress is displayed. In addition, the number of found TV and radio
stations is displayed.
 Afterwards, press
O K
At the end of automatic program storage, a TV programme is shown.
The initial installation described here corresponds to the
option in the
(here you can also call up the transponder list using the
O K
button and activate the desired
O K
to continue.
menu.
INSTALLATION
, you can now make settings for the
SATELLITE
button again to start the search. After that,
O K
button again to start the search. After that, decide
switch
DISEQC
SATELLITE POSITION 1/2,
(here you can also
1  4
O K
FIRST TIME INSTALLATION
EN
15