Technical Features - Ober ALCYO ACCU-TRK Instrucciones De Uso

TECHNICAL FEATURES

Table 1
Model
ALCYO22 ACCU-TRK
ALCYO44 ACCU-TRK
ALCYO66 ACCU-TRK
ALCYO 22 ATE
ALCYO 44 ATE
ALCYO 66 ATE
Air inlet 1/8 GAS; Ø inside tube min. 6 mm - 1/4" hexagonal connection (6.35 mm)
Note: make sure that the performance features required correspond to those described above, otherwise it will be
necessary to choose a different model from the broad range offered by OBER.
CLUTCH
The gear clutch has the function of transmitting to the bit, and therefore to the screw, only part of the torque that may be
produced by the screwdriver so as to ensure optimal screw-tightening conditions. It also makes it possible to maintain a
highly constant level of torque when tightening screws in sequence. The range of clutch settings is determined by the
spring. Four springs are available, each one covering a range of torque values. Each screwdriver is supplied with the
spring specified in table 2. If you should wish to obtain a level of torque outside its range of settings, you may request
other springs.
Table 2 RANGE OF CLUTCH SETTINGS
ALCYO 22
ALCYO 44
ALCYO 66
Equipment sprin
6
Code Speed
No-load
(rpm)
8604272 1200
8604274 800
8604276 500
8604273 1200
8604275 800
8604277 500
Spring code
5080213
5080217
5080217
5080198
Torque Power
max power
(Nm)
(W)
0,8 - 2 110
1,7 - 3 110
1,7 - 3,7 110
0,8 - 2 110
1,7 - 3 110
1,7 - 3,7 110
Spring colour
dark blue
plain
plain
light blue
Air Weight
Consump.
(Nl/min.) (Kg)
340 0,5
340 0,5
340 0,5
340 0,5
340 0,5
340 0,5
Torque (Nm)
0.8 – 2
1.7 – 3.7
1.7 – 3.7
0.4 – 0.9
GB