DONOT lightthis grill withoutfirst reading
the Lighting Instructions.
DONOT lightthis grill withoutchecking the
burnertubesfor blockage thatcouldhave
occurred duringshipment. SeetheCleaning a nd
Maintenance Instructions.
Theinstallation mustconform with local c odes or,
in the absence of localcodes, w itheitherthe
National F uel G asCode, A NSIZ223.1/NFPA 54,
or CAN/CGA B 149.1, N atural G asandPropane
Installation Code, o r Propane S torage and
Handling Code,B149.2.
o DONOT useanytypeof charcoal in thisgrill.
o DONOT operate the mainburners andback
burnerat the sametime.(If Equipped)
• ALWAYS inspect t hegrease traybefore eachuse.
Remove a ndcleanas necessary.
THIS
GRILL
IS FOR OUTDOOR
USE ONLY!
This outdoor
cooking
gas appliance
is not intended
to
be installed
in or on boats or recreational
vehicles.
Liquid
Propane
Gas (LPG) grills
must
be used with
the liquid
propane
gas regulator
assembly
supplied.
This grill is not convertible
to natural
gas.
ALWAYS keep the gas hose assembly
away from
any heated
surface
and dripping
grease.
Avoid
unnecessary
twisting
of the hose.
Visually
inspect
the hose prior to each use for cuts,
cracks,
excessive
wear, or other
damage.
Do not
use the gas grill if the hose appears
damaged.
Call Sears at 1-800-4-MY-HOME®
(1-800-469-4663)
for a Kenmore
replacement
gas hose assembly.
With local codes,
or in the absence
of local codes,
with the National
Electrical
Code, ANSI/NFPA
70,
or the Canadian
Electrical
Code, CSA C22.1.
Keep
any electrical
cords
away from
hot surfaces.
NEVER use your gas grill in a building,
garage,
porch,
shed,
breezeway
or any
other enclosed
area.
•
NEVER obstruct
the flow of ventilation
air around
your
gas grill
cabinet.
•
DO NOT leave children
and pets unattended
in
the area when the grill
is in operation.
ENSURE the grill is on a level surface
when
in
operation.
You can adjust
the feet in front to
level and stabilize
the grill.
•
NEVER attach
an unregulated
gas line
to this appliance.
PRE-ASSEMBLY
• Two people
will be necessary
to assemble
the
larger
parts of the grill.
• Lay a cardboard
sheet
on the floor
and use as a
work surface
to protect
floor
and grill parts from
scratches.
• Once all parts are removed
and unpacked,
use the
Hardware
and Part Diagrams
to ensure
all items
are included
and free of damage.
• SAVE
THIS
INSTRUCTIONS
Leave the instructions with the consumer
Retain the instructions for future reference