Using The Joystick Button; Basic Functions - LG 32LX330C Manual Del Proprietário

CAUTION
• When handling the TV, be careful not to damage
the protruding joystick button.
(Depending upon model)
CAUTION
• Avoid touching the screen at all times, as this
may result in damage to the screen.
• Do not place the product on the floor with its
front facing down without padding. Failure to do
so may result in damage to the screen.
• Do not move the TV by holding the cable
holders, as the cable holders may break, and
injuries and damage to the TV may occur.
(Depending upon model)

Using the Joystick Button

(Image shown may differ from your TV.)
You can operate the TV by pressing the button or
moving the joystick left, right, up, or down.
Joystick Button

Basic Functions

When the TV is turned off, place your
finger on the joystick button, press it
Power On once, and release it.
When the TV is turned on, place your
finger on the joystick button, press it
once for a few seconds, and release it.
(However, if the menu button is on the
Power Off
screen, pressing and holding the joystick
button will let you exit the menu.)
If you place your finger over the joystick
button and move it left or right, you can
Volume adjust the volume level. (Depending
Control upon model)
If you place your finger over the joystick
button and move it up or down, you
can scroll through the saved channels.
Channels
(Depending upon model)
Control
NOTE
• Move the joystick up, down, left, or right. Be
careful not to press the joystick button. If you
press the joystick button first, you may not be
able to adjust the volume level and/or scroll
through saved channels.
Adjusting the Menu
(Depending upon model)
When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving
the joystick button up, down, left, or right.
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV viewing
Changes the input source.
NOTE
• Menu item 11 (Key Defeat) must be set to 0
(zero) for the menu to work. Because the default
value is 1 (one), the menu does not work.
(For LX570M series)
9