Genie LA 500 A4 Manual De Instrucciones página 12

Technical data
Mains voltage (V)
Consumption
Laminating width
Size of the machine (mm)
Film of utilizable
(microns)
Heating up time
Laminating speed
HANDLING THE GUARANTEE
Thank you very much for purchasing this GENIE product. Please note the following
advice whenever this machine does not function faultlessly, contrary to expectations.
The guarantee period amounts to 24 months from the date of purchase, provided that
the machine has been used appropriately. Please keep the proof-of-purchase
voucher and original packaging in a safe place. The warranty is only valid for defects
in materials or fabrication. However, it is invalid for damage that has occurred to
breakable parts, e.g., on the casing. Machines that have been damaged by
inappropriate use externally, are excluded from being exchanged. A guarantee will
expire whenever any repairs have been carried out without the express consent of
our customer service department.
Repairs under the guarantee can only be made when the proof-of-purchase voucher
is enclosed with the defective machine – please notify us about the return by
telephone! Please give your name, address, post code, town and telephone number
with the dialing code. Please state the reason for your complaint too.
We regret any inconvenience caused!
Our service hot line
Tel. (++49) (0) 6122-7279891 ● Fax (++49) (0) 6122-705952 ●E-mail:
hotline@genie-online.de
Address: GENIE GmbH & Co. KG, -Service- , Berta-Cramer-Ring 22, D-65205
Wiesbaden. Deutschland/ Germany
Disposal:
Guideline 2012/19/EC concerning the handling, collection, recycling and
disposal of electrical and electronic equipment and their components ('waste
electrical and electronic equipment', known as WEEE).
The crossed symbol on a rubbish container indicates that the machine or device is
not allowed to be disposed of but it must be handed over to a suitably equipped
collection centre for proper recycling or disposal.
220 V to 240 V, 50 Hz, 300 W
1.4 A
230 mm
340 x 128 x 100 mm
thickness 80 minimum, 125 maximum
≤ 3 min.
350mm/min for 80 mic and
250mm/min for 125 mic.
12